TSW212 on Teltonika Networks'i hallatav L2-switch, millel on täiendavad L3-funktsioonid, nagu DHCPv6-klienditugi ja staatiline IPv6-routing, mis võimaldab võrgu paremat haldamist. See kommutaator toetab mitut tööstusprotokolli, sealhulgas EtherNet/IP, PROFINET ja MRP, ning sellel on 8 Gigabit Ethernet-porti ja 2 SFP-porti, et tagada töökindel pikamaa valguskaabelühendus. TSW212 on ümbritsetud vastupidavasse alumiiniumist korpusesse, mis peab suurepäraselt vastu äärmuslikele temperatuuridele ja tugevale vibratsioonile - ja seda kõike tänu integreeritud DIN-riba kinnitusele hõlpsasti paigaldatuna.
MANAGEERITAVSWITCH
L2 koos täiendavate L3 funktsioonidega täiustatud haldusvõimaluste jaoks
PROFINET & ROHKEM
Toetab Profinet'i automaatseks andmetöötluseks koos teiste protokollidega, nagu EtherNet/IP ja MRP.
ETHERNET & SFP
8 x Gigabit Ethernet porti ja 2 x SFP porti valguskaabelühenduseks
TSWOS
Teltonika Networks OS kommutaatoritele, intuitiivselt kujundatud lõpmatute konfiguratsioonide jaoks.
ETHERNET
Fibre
2 x SFP ports
IEEE 802.3 series standards
IEEE 802.1p, IEEE 802.1Q, 802.3az
LAN
Multi-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossover
SERVICES
EtherNet/IP
Yes
Profinet (class B)
Yes
SNMP V2, V3
Yes
LLDP
Yes
NETWORK
MRP
MRP client role, MRP manager role
L2 features
Loop protection, Forwarding table, VLAN, STP/RSTP
DHCP
DHCP server, DHCP client
Port Settings
Enable/disable, link speed control, port isolation, EEE (802.3az) management, Port Mirroring
L3 Features
Static IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 address
QOS
QOS
Port priority, DSCP priority, 802.1p priority, TOS
Scheduling method
SP/WFQ/WRR
Bandwidth control
Rate limiting, storm control
SYSTEM CHARACTERISTICS
RAM
128MB, DDR3
FLASH storage
16 MB serial flash
FIRMWARE / CONFIGURATION
WEB UI
Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA
Update FW
RMS
Update FW/configuration for multiple devices at once
Keep settings
Update FW without losing current configuration
FIRMWARE CUSTOMISATION
Operating system
TSWOS (OpenWrt based Linux OS)
Supported languages
Busybox shell, Lua, C, C++
Development tools
SDK package with build environment provided
DIAGNOSTICS
Tools
Cable diagnostic, ping, traceroute, nslookup
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking)
20 Gbps
Packet buffer
512 KB
MAC address table size
8K entries
Jumbo frame support
10000 bytes
POWER
Connector
2-pin industrial DC power socket
Input voltage range
7 – 57 VDC
Power consumption
Idle: < 2.5 W / Max: 6 W
PHYSICAL INTERFACES
Ethernet
8 x RJ45 ports, 10/100/1000 Mbps
Fibre
2 x SFP ports
Status LEDs
1 x Power LED, 1 x Aux LED, 16 x LAN status LEDs, 2 x SFP status LEDs
Power
1 x 2-pin industrial DC power socket
Reset
Software reset button
Other
1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material
Anodized aluminum housing and panels
Dimensions (W x H x D)
132 x 44.2 x 122.2 mm
Weight
615 g
Mounting options
Integrated DIN rail bracket, wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature
-40 °C to 75 °C
Operating humidity
10% to 90% non-condensing
Ingress Protection Rating
IP30
REGULATORY & TYPE APPROVALS
Regulatory
CE, CB, RCM, FCC, IC, EAC, UCRF
EMC EMISSIONS & IMMUNITY
Standards
EN 55032:2015+A1:2020; EN 55035:2017+A11:2020; EN IEC 61000-6-2:2019
ESD
EN 61000-4-2:2009
EFT
EN 61000-4-4:2012
Radiated Immunity
EN IEC 61000-4-3:2020
Surge Immunity (AC Mains Power Port)
EN 61000-4-5:2014+A1:2017
CS
EN 61000-4-6:2014
DIP
EN IEC 61000-4-11:2020
SAFETY
Standards
IEC 62368-1:2018
