Fluke v3000 FC Wireless Voltage Kit on osa Fluke Connecti juhtmevabade testimisvahendite meeskonnast.
Ühendage traadita vahelduvvoolupinge moodul v3000 FC oma testpunktiga ja vaadake tulemusi kuni 20 meetri kaugusel asuval traadita digitaalsel multimeetril 3000 FC.
Säästate aega, kuna mitme mõõtmise kogumine vähendab jooksu. Kasutage mitut moodulit kolmefaasiliste süsteemide mõõtmiseks, eraldiseisva mõõtmisvahendina või kombineerige teiste Fluke Connect ™ moodulitega süsteemiks mitme mõõtmise jaoks.
Lühikese vahemaa tagant saate moodulite näitusid vaadata isegi läbi suletud elektrikilpide. Lisaks ei pea enam andmeid üles kirjutama, sest FC Wireless Temperature Module salvestab kuni 65 000 komplekti ajamärgistatud min/max/avg näitusid, kasutades lisavarustusena saadavat PC-adapterit. Fluke Connecti traadita testimisvahendid pakuvad ka suuremat turvalisust, võimaldades teil vaadata mõõtmistulemusi testimiskohast eraldi.
Nüüd saate mõõtmisi teha liikuvatel masinatel, kusjuures ainult mõõtemoodul on ohus.
Fluke FC Wireless v3000 Voltage Kit võimaldab paljude tavaliste elektriliste parameetrite mõõtmist.
Fluke 3000 FC seeria juhtmevaba multimeeter koos Fluke Connect™ rakendusega sisaldab kõiki vajalikke seadmeid mugavaks testimiseks ja mõõtmise tõrkeotsinguks:
Vahelduv- ja alalispinge mõõtmised kuni 1000 V
vahelduv- ja alalisvoolu mõõtmine 0,01 mA eraldusvõimega
Pidevuse, takistuse, dioodi testi, mahtuvuse ja sageduse mõõtmised
MIN/MAX salvestamine
CAT III 1000 V, Cat IV 600 V; IP54
Fluke v3000 FC traadita vahelduvvoolupingemooduliga saate:
Mõõtke kuni 1000 V tõelise ruutkeskmist vahelduvvoolu
Kasutada eraldiseisva mõõtjana või süsteemi osana
kasutada logimisfunktsiooni kuni 65 000 mõõtetulemuse salvestamiseks ja salvestamiseks.
Fluke v3000 FC traadita vahelduvvoolupinge komplekt
Sisaldab:
Fluke 3000 FC seeria traadita multimeeter
Fluke v3000 vahelduvvoolu pinge moodul
TL175 testjuhtmed
TL224 testjuhtmed
AC175 Alligatorklambrid
AC285 Alligatorklambrid
Magnetiline riputusrihm
Fluke 3000 FC Wireless Digital Multimeter
* For all specifications: accuracy is specified for one year after calibration, at operating temperatures of 18°C to 28°C, with relative humidity at 0% to 90%. Accuracy specifications take the form of ±([% of Reading] + [Number of least significant digits]).
|
Detailed Specifications |
|
AC Voltage |
|
Range 1 | Resolution | Accuracy 234 | Accuracy 234 |
| 45 Hz to 500 Hz | 500 Hz to 1 kHz |
|
600.0 mV |
0.1 mV |
1.0% + 3 |
2.0% + 3 |
|
6.000 V |
0.001 V |
|
60.00 V |
0.01 V |
|
600.0 V |
0.1 V |
|
1000 V |
1 V |
1. All AC voltage ranges are specified from 1% of range to 100% of range.
2. Crest factor of ≤ 3 at full scale up to 500 V, decreasing linearly to crest factor < 1.5 at 1000 V.
3. For non-sinusoidial waveforms, add ±(2% of reading + 2% full scale) typical, for crest factor up to 3.
4. Do not exceed 107 V-Hz. |
|
DC Voltage, Continuity, Resistance, Diode Test and Capacitance |
|
Function | Range | Resolution | Accuracy |
|
mV |
600.0 mV |
0.1 mV |
0.09% + 2 |
|
V |
6.000 V |
0.001 V |
0.09% + 2 |
|
60.00 V |
0.01 V |
|
600.0 V |
0.1 V |
|
1000 V |
1 V |
0.15% + 2 |
|
Ω |
600 Ω |
1 Ω |
Meter beeps at < 25 Ω, beeper detects opens or shorts of 250 μs or longer. |
|
Ω |
600.0 Ω |
0.1 Ω |
0.5% + 2 |
|
6.000 kΩ |
0.001 kΩ |
0.5% + 1 |
|
60.00 kΩ |
0.01 kΩ |
|
60.00 kΩ |
0.1 kΩ |
|
600.0 kΩ |
0.001 MΩ |
|
50.00 MΩ |
0.01 MΩ |
1.5% + 3 |
|
Diode test |
2.000 V |
0.001 V |
1% + 2 |
|
µF |
1000 nF |
1 nF |
1.2% + 2 |
|
10.00 μF |
0.01 μF |
|
100.0 μF |
0.1 μF |
|
9999 μF1 |
1 μF |
10% typical |
|
1. In the 9999 μF range for measurements to 1000 μF, the measurement accuracy is 1.2% + 2. |
|
AC and DC Current |
|
Function | Range 1 | Resolution | Accuracy |
mA AC
(45 Hz to 1 kHz) |
60.00 mA |
0.01 mA |
1.5% + 3 |
|
400.0 mA 3 |
0.1 mA |
|
mA DC 2 |
60.00 mA |
0.01 mA |
0.5% + 3 |
|
400.0 mA 3 |
0.1 mA |
1. All AC current ranges are specified from 5% of range to 100% of range.
2. Input burden voltage (typical): 400 mA input 2 mV/mA.
3. 400.0 mA accuracy specified up to 600 mA overload. |
|
Frequency |
|
Range | Resolution | Accuracy 1 |
|
99.99 Hz |
0.01 Hz |
0.1% + 1 |
|
999.9 Hz |
0.1 Hz |
|
9.999 kHz |
0.001 kHz |
|
99.99 kHz |
0.01 kHz |
|
1. Frequency is specified up to 99.99 kHz in volts and up to 10 kHz in amps. |
|
Input Characteristics |
|
Function | Overload
protection | Input impedance
(nominal) | Common mode rejection ratio (1 kΩ unbalance) | Normal mode rejection |
 |
1100 Vrms |
> 10 MΩ < 100 pF |
> 120 dB at DC, 50 Hz or 60 Hz |
> 60 dB at 50 Hz or 60 Hz |
 |
1100 Vrms |
> 10 MΩ < 100 pF |
> 60 dB, DC to 60 Hz | |
 |
1100 Vrms |
> 10 MΩ < 100 pF |
> 120 dB at DC, 50 Hz or 60 Hz |
> 60 dB at 50 Hz or 60 Hz |
|
Open circuit test voltage | Full scale voltage | Typical short circuit current |
| To 6 MΩ | 50 MΩ |
 |
1100 Vrms |
< 2.7 VDC |
< 0.7 VDC |
< 0.9 VDC |
< 350 mA |
 |
1100 Vrms |
< 2.7 VDC |
2.000 VDC |
< 1.1 mA |
|
mA Function |
|
Overload Protection |
Fused, 44/100 A, 1000 V FAST Fuse |
|
Overload |
600 mA overload for 2 minutes maximum, 10 minutes rest minimum |
|
MIN/MAX Recording Accuracy |
|
DC functions |
The specified accuracy of the measurement function ±12 counts for changes > 350 mS in duration. |
|
AC functions |
The specified accuracy of the measurement function ±40 counts for changes > 900 mS in duration. |
|
General Specifications |
|
Maximum voltage between any terminal and earth ground |
1000 VDC or AC rms |
|
Ω fuse protection from A inputs |
0.44 A (44/100 A, 440 mA), 1000 V FAST Fuse, Fluke specified part only |
|
Display (LCD) | Update rate |
4/sec |
| Volts, amps, ohms |
6000 counts |
| Frequency |
10,000 counts |
| Capacitance |
1,000 counts |
|
Battery type |
Three AA Alkaline batteries, NEDA 15A IEC LR6 |
|
Battery life |
250 hours minimum |
|
RF communications |
2.4 GHZ ISM Band |
|
RF communication range | Open air, unobstructed |
Up to 20 m |
| Obstructed, sheetrock wall |
Up to 6.5 m |
| Obstructed, concrete wall, or steel electrical enclosure |
Up to 3.5 m |
|
Temperature | Operating |
-10°C to 50°C |
| Storage |
-40°C to 60°C |
|
Temperature coefficient |
0.1 x (specified accuracy) / °C (< 18°C or > 28°C) |
|
Relative humidity |
0% to 90% (0°C to 35°C)
0% to 75% (35°C to 40°C)
0% to 45% (40°C to 50°C) |
|
Altitude | Operating |
2,000 m |
| Storage |
12,000 m |
Electromagnetic compatibility
EMI, RFI, EMC, RF |
EN 61326-1:2006, EN 61326-2-2:2006
ETSI EN 300 328 V1.7.1:2006, ETSI EN 300 489
V1.8.1:2008, FCC Part 15 Subpart C Sections 15.207, 15.209, 15.249
FCCID : FCC: T68-FDMMBLE IC: 6627A-FDMMBLE |
|
Safety compliance | ANSI/ISA 61010-1 / (82.02.01) |
3rd edition |
| CAN/CSA-C22.2 No 61010-1-12 |
3rd edition |
| UL 61010-1 |
3rd edition |
| IEC/EN 61010-1 |
2010 |
|
Certifications |
CSA, FCC, CE |
|
Ingress Protection (IP) rating |
IP54 |
|
Pollution degree |
2 |
|
Size (H x W x L) |
4.75 x 9.3 x 20.7 cm (1.87 x 3.68 x 8.14 in) |
|
Weight |
340 g (12 oz) |
|
Warranty |
Three years |
|
Not compatible with Fluke CNX test tools |
Fluke v3000 FC Wireless AC Voltage Module
Accuracy is specified as ±([% of reading] + [number of least significant digits]). All ranges are autoranging.
Accuracy is specified from 5% to 100% of the range obtained by autoranging, from 18°C to 28°C.
|
Specifications |
|
Range ¹ / Resolution |
6.000 V / 0.001 V
60.00 V / 0.01 V
600.0 V / 0.1 V
1000 V / 1 V |
|
Accuracy 234 | 45 Hz to 500 Hz |
1.0% + 3 |
|
500 Hz to 1 kHz |
2.0% + 3 |
1. All AC voltage ranges are specified from 1% of range to 100% of range.
2. Crest factor of ≤ 3 at full scale up to 500 V, decreasing linearly to crest factor < 1.5 at 1000 V.
3. For non-sinusoidial waveforms, add ±(2% of reading + 2% full scale) typical, for crest factor up to 3.
4. Do not exceed 107 V-Hz. |
|
General Specifications |
|
LCD w/ backlight |
3½ digits, 6000 counts, updates 4/sec |
|
Battery type |
2 AA, NEDA 15 A, IEC LR6 |
|
Battery life |
400 Hours |
|
Memory |
Record up to 65000 readings |
|
RF communications |
2.4 GHZ ISM Band |
|
RF communication range | Open air, unobstructed |
Up to 20 m |
|
Obstructed, sheetrock wall |
Up to 6.5 m |
|
Obstructed, concrete wall or steel electrical enclosure |
Up to 3.5 m |
|
Operating temperature |
-10°C to +50°C |
|
Storage temperature |
-40°C to +60°C |
|
Temperature coefficient |
0.1 x (specified accuracy) / °C (< 18°C or > 28°C) |
|
Operating humidity |
90% at 35°C, 45% at 40°C, 45% at 50°C |
|
Altitude | Operating |
2,000 m |
|
Storage |
12,000 m |
|
EMC |
EN 61326-1:2006 |
|
Safety compliance | ANSI/ISA 61010-1 / (82.02.01) |
3rd edition |
|
CAN/CSA-C22.2 No 61010-1-12 |
3rd edition |
|
UL 61010-1 |
3rd edition |
|
IEC/EN 61010-1 |
2010 |
|
Safety rating |
CAT IV 600 V, CAT III 1000 V |
|
Certifications |
CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE |
|
Ingress Protection (IP) rating |
IP42 |
|
Pollution Degree |
2 |
|
Size (H x W x D) |
16.5 x 6.35 x 1.4 cm (6.5 x 2.5 x 1.4 in) |
|
Weight |
.22 kg (8 oz) |
|
Warranty |
Three years |
|
Not compatible with Fluke CNX test tools |
