DIN LATT
Sisseehitatud, integreeritud DIN-kinnitus
KOMPAKTNE
102 x 25 x 81,5 mm
GIGABIT ETHERNET
4 x Gigabit Ethernet kiirusega kuni 1000 Mbit/s
7-57 V
Lai valik toetatud toitepingeid
KESTVUS
Vastupidav alumiiniumist korpus
-40 °C KUNI 75 °C
Lai töötemperatuurivahemik
TSW304 on Teltonika Networks'i esimene haldamata lüliti, millel on integreeritud, sisseehitatud DIN-redeli kinnitus.
Varustatud nelja Gigabit Ethernet porti, mis toetavad IEEE 802.3, IEEE 802.3u ja 802.3az Ethernet standardeid.
TSW304 on projekteeritud lihtsat paigaldust silmas pidades ning sellel on kompaktsed mõõtmed ja löögikindel korpus koos integreeritud DIN-kinnitusega.
10/100/1000 Mbit/s Ethernet-portid ökonoomsete, suure ribalaiusega lahenduste jaoks, mis tagavad usaldusväärse andmeside läbilaskevõime.
2-poolne tööstuslik toitepesa ja lai toetatud toitepinge vahemik (7-57 VDC ja 9-40 VAC).
|
INTERFACES |
|
Ethernet |
4 x RJ45 ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
|
PERFORMANCE SPECIFICATIONS |
|
Bandwidth (Non-blocking) |
8 Gbps |
|
Packet buffer |
128 KB |
|
MAC address table size |
2K entries |
|
Jumbo frame support |
9216 bytes |
|
POWER |
|
Connector |
2-pin power socket |
|
Input voltage range |
7 - 57 VDC; 9 - 40 VAC |
|
PoE (passive) |
Passive PoE input on port No. 1 |
|
Power consumption |
Idle: 0.26 W / Max: 1.44 W |
|
PHYSICAL INTERFACES (PORTS, LEDS) |
|
Ethernet |
4 x RJ45 ports, 10/100/1000 Mbps |
|
Status LEDs |
1 x Power LED, 8 x LAN status LED’s |
|
Power |
1 x 2-pin power socket |
|
Ground |
1 x Grounding screw |
|
PHYSICAL SPECIFICATION |
|
Casing material |
Aluminum housing |
|
Dimensions (W x H x D) |
102x25x81.5 mm |
|
Weight |
210 g |
|
Mounting options |
DIN rail mounting |
|
OPERATING ENVIRONMENT |
|
Operating temperature |
-40 C to 75 C |
|
Operating humidity |
10 % to 90 % non-condensing |
|
Ingress Protection Rating |
IP30 |
|
REGULATORY & TYPE APPROVALS |
|
Regulatory |
CE, REACH, RoHS, WEEE |
|
TSW304 |
UKCA, FCC, IC, CB, RCM |
|
SAFETY |
|
Standards |
EN IEC 62368-1:2020+A11:2020 |
