Hardware compatibility
All computers with HDMI connections
HDMI interface
The system supports resolutions such as 480p, 720p, 1080P or WUXGA (1920x1200) @60Hz* and 24 bit color depth.
* with reduced blanking
Software compatibility
All known operating systems
Audio
The system delivers eight channels of HDMI audio with sample sizes of 16, 20 or 24 bit at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz.
Computer connections at transmitter (TX)
HDMI type A male, USB type A (for power only)
Display connections at receiver (RX)
HDMI type A male
Physical design
Injection moulded ABS cases:
45mm / 1.8’’ (w) x 63mm / 2.5’’(d) x 21mm / 0.8’’(h) with 30cm / 12” pigtails. Weight 250g / 0.6 lb per pair.
Power
USB powered, 5VDC -2.5W for both RX and TX units combined.
Operating temperature
0 to 40ºC / 32 to 104ºF
Approvals
CE, FCC
Important extension distance Information
Recommended cables are CAT7 shielded foiled twisted pairs:
- Daetwyler 7702 Flexible patch cable
- Daetwyler 7120 Bulk cable
Category 6a (or better) shielded twisted pair cable must be used to connect the transmitter and receiver units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
| Resolution | Frequency | Patch Connections | Cable Type
| Distance |
|
1920x1200 |
60Hz |
0 |
CAT7a |
50 metres |
|
1920x1200 |
60Hz |
0 |
CAT6a (shielded) |
50 metres |
|
1920x1200 |
60Hz |
2 |
CAT6a (shielded) |
40 metres |
|
1920x1200 |
60Hz |
2 |
CAT7a |
40 metres |
Note:Distances are achieved using single lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5 meters. Preferably patch cables should be of type CAT7 and less than 2 meters. Patch cables over 2 meters must be CAT7.
