IPC3SAD2 paneelilüliti, tuntud ka kui surunupplüliti, on mitmekülgne ja töökindel lüliti, mis sobib suurepäraselt mitmesugusteks rakendusteks. Oma ruudukujulise kuju ja elegantse disainiga lisab see igale paneelile modernse nüansi.
Põhiomadused
- Aktuaatori värvid: Must
- Elektrilised funktsioonid: Normaalselt avatud (NO)
- Paigaldus: Jootekontakt
- Kontakti materjalid: Hõbe (kullatud)
Distinctive Features:
Illuminated or non-illuminated
Tactile feedback
Wide variety of configurations
Flat round actuator for optional marking
Sealed to IP67 and IP69K
General Specifications:
Panel thickness : 1,5 mm (.059) min. 5,5 mm (.217) max.
Total travel : 2,5 mm (.098) +/- 0,3 mm
Typical operating force : 10 N
Low level/mech. life : 200.000 cycles
Torque : 1,5 Nm max. applied to nut
Soldering : 320°C max. for 3 sec.
Environmental Specifications:
Front panel sealing : IP67 according to IEC 60529
Shock resistance : 100 g according to IEC 512-4, test 6c
Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
Salt spray : IEC 512-6, test 11f
Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)
Operating temperature : -40°C to +85°C
Electrical Specifications:
Max. current/voltage rating with resistive load :4A 12VDC, 200.000 cycles1A 48VDC, 200.000 cycles2A 48VDC, 100.000 cycles3A 48VDC, 75.000 cycles1A 72VDC, 15.000 cycles
Initial contact resistance : 100 mΩ max.
Insulation resistance : 1 GΩ min. at 500VDC
Dielectric strength : 1.500 Vrms between terminals - 1.000 Vrms between terminals and frame
