Fluke i30s AC/DC vooluklamber
i30s vooluklamber põhineb Hall Effect tehnoloogial, mida kasutatakse nii alalis- kui ka vahelduvvoolu mõõtmiseks. i30s'i võib kasutada koos ostsilloskoopide ja muude sobivate registreerimisseadmetega täpseks mittesekkuvaks voolu mõõtmiseks.
Fluke i30s AC/DC Current Clamp
Electrical specifications
Specified current range30 mA to 30 A DC, 30 mA to 20 A AC rms
Usable current range5 mA to 30 A DC, 30 mA to 20 A AC rms
Crest factor1.4 in
Output sensitivity100 mV/A
Accuracy (at +25°C)DC ±1 % of reading ±2 mA
AC ± 0.5 dB of reading ±2 mA
Resolution±1 mA
Load impedance> 100 kΩ
Conductor position sensitivity±1% relative to center reading
Frequency rangeDC to 100 kHz (-0.5 dB)
Phase shift below 1 kHz< 2°
Temperature coefficient±0.01% of reading / °C
Power supply9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
Working voltage (see Safety Standards section)300 V AC rms or DC
General Specifications
Maximum conductor size19 mm diameter
Output connectionSafety BNC connector, supplied with safety 4 mm adapter
Output zeroManual adjust via thumbwheel
Cable length2 m
Operating temperature range0°C to +50°C
Storage temperature range (with battery removed)-20°C to +85°C
Operating humidity15% to 85% (non-condensing)
Weight250 g
SafetyIEC 61010-1, Pollution Degree 2
IEC 61010-2- 032: CAT III 300V
Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc andfrequencies below 1 kHz.
EMC CompatibilityIEC 61326-1: Portable Electromagnetic Environment
