5ETH965 trükkplaadilüliti on mitmekülgne ja usaldusväärne komponent, mis on loodud sujuvaks paigalduseks. Tänu läbi-augu paigalduse valikule on installimine imelihtne. Selle aktiveerimisjõud 65 N tagab täpse ja pingutuseta toimingu, pakkudes optimaalset funktsionaalsust. Sobides suurepäraselt paljudeks rakendusteks, tagab 5ETH965 trükkplaadilüliti erakordse jõudluse ja vastupidavuse.
Põhiomadused
- Aktiveerimisjõud: 65 N
- Paigaldus: Läbi-augu
Distinctive Features:
Square cap 15.0 x 15.0 mm
h=12.5 mm
Round corners, flat surface
With or without spot indicator illumination
Illumination with LEDs on PCB
General Specifications:
Through-hole (TH) or surface mount (SMD) or right angel through-hole
50mA/24VDC
Single pole/momentary
10,000,000 operations lifetime (NO function)
Temperature range: -40/+160°C
IP 67 sealing
Actuation force: 2.0N, 3.5N, 6.5NNO or NC/NO
Environmental Specifications:
Working temperature: -40/+160°C
Storage temperature: -40/+160°C
Soldering (TH): IEC 68-2-20 8
Soldering (SMD): JEDEC J-STD-020C
ENVIRONMETAL ENDURANCE IEC 68-2-3
Temperature: +40°C
Humidity: 93% RH
Duration: 56 Days
TEMPERATURE CYCLING IEC 68-2-14
Temperature limit: -55/+85°C
Number of cycles: 200
Exposure time at each temperature: 10 min
Recovery time before measurements: 16 hrs
Sealing IEC 529: IP-67
Electrical Specifications:
Contact resistance: <30m Ω - typ. 10m Ω
Insulation resistance: >10M Ω
Recommended load: Silver- 0.5-50mA 24VDC Gold - 0.5μ-50mA 24VDC
Contact bounce: <2mS - typically 0.5mS
