LCD panel for easy IP address configuration (excluding wide-temperature range models)
Dual-LAN cards with two independent MAC addresses and IP addresses
Redundant COM function available when both LANs are active
Dual-host redundancy can be used to add a backup PC to your system
Dual-AC-power inputs (for AC models only)
Real COM/TTY drivers for Windows and Linux
Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
Redundancy is an important issue for industrial networks, and various types of solutions have been developed to provide alternative network paths when equipment or software failures occur. “Watchdog” hardware is installed to utilize redundant hardware, and a “Token”- switching software mechanism is applied. The CN2600 terminal server uses its built-in Dual-LAN ports to implement a “Redundant COM” mode that keeps your applications running uninterrupted.
Dual-LAN Redundancy
The CN2600 has two separate LAN ports that can be connected to separate LAN networks. Dual-LAN redundancy involves setting up two separate physical networks to connect the PC host with the CN2600 (the PC host also requires two LAN cards). If one connection fails, the PC host can still communicate with your serial devices over the alternative LAN connection.
Redundant COM
Moxa offers “Redundant COM,” an easy-to-use application to provide an alternative solution for network redundancy. When the CN2600 receives a data packet from a connected device, two identical data packets are sent over two independent LAN connections to prevent lost data packets if one LAN connection becomes unavailable. The CN2600 software is programmed to automatically discard duplicate data packets.
Dual-host Redundancy
The CN2600’s dual-LAN cards can also be used to set up “dual-host” redundancy. In this case, both networks (LAN A and LAN B in the figure) are connected to two different hosts. If either of the two hosts shuts down unexpectedly, the other host will still be able to communicate with serial devices connected to the CN2600.
Dual-AC Model Supported
Dual-power redundancy uses two power inputs and redundant internal power supplies to ensure that all of the CN2600’s functions will be available, even in the event of power circuit failures.
10/100BaseT(X) Ports (RJ45 connector)
Magnetic Isolation Protection
Configuration Options
CN2610-8/CN2610-16: Serial Console, Telnet Console, Windows Utility, Device Search Utility (DSU)
CN2650-8/CN2650-16/CN2600-2AC models: Serial Console, Telnet Console, Windows Utility, Device Search Utility (DSU), Web console (HTTP/HTTPS)
Management
ARP, BOOTP, DDNS, DHCP Client, DNS, HTTP, IPv4, SMTP, SNMPv1/v2c/v3, TCP/IP, Telnet, UDP, ICMP, SLIP
MIB
Security
HTTPS/SSL, RADIUS, SSH, PAP, CHAP
Unicast Routing
Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Real TTY Drivers
Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY Drivers
SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Android API
Connector
No. of Ports
CN2610-8 models: 8
CN2610-16 models: 16
Serial Standards
CN2610 models: RS-232
CN2650 models: RS-232, RS-422, RS-485
Operation Modes
Real COM mode, TCP Server mode, TCP Client mode, UDP mode, RFC2217 mode, Terminal mode, Reverse Telnet mode, PPP mode, DRDAS mode, Redundant COM mode, Disabled
Baudrate
Data Bits
Stop Bits
Parity
None, Even, Odd, Space, Mark
Flow Control
None, RTS/CTS, DTR/DSR, XON/XOFF
Isolation
RS-485 Data Direction Control
ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485
1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485
Console Port
RS-232 (TxD, RxD, GND), 8-pin RJ45 (19200, n, 8, 1)
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
RS-485-4w
RS-485-2w
No. of Power Inputs
CN2600 Series: 1
CN2600 Series -2AC models: 2
Input Current
CN2600 Series: 130 mA @ 110 VAC
CN2600 Series -HV models: 200 mA @ 88 VDC
Input Voltage
AC models: 100 to 240 VAC, 47 to 63 Hz
DC models: 110 VDC (88 to 300 VDC)
Automatic Reboot Trigger
Alert Tools
Built-in buzzer and RTC (real-time clock)
Housing
Installation
Dimensions (with ears)
480 x 198 x 45.5 mm (18.9 x 7.80 x 1.77 in)
Dimensions (without ears)
440 x 198 x 45.5 mm (17.32 x 7.80 x 1.77 in)
Weight
CN2610-8/CN2650-8: 2,410 g (5.31 lb)
CN2610-16/CN2650-16: 2,460 g (5.42 lb)
CN2610-8-2AC/CN2650-8-2AC/CN2650-8-2AC-T: 2,560 g (5.64 lb)
CN2610-16-2AC/CN2650-16-2AC/CN2650-16-2AC-T: 2,640 g (5.82 lb)
CN2650I-8: 3,666 g (8.08 lb)
CN2650I-16: 3,776 g (8.32 lb)
CN2650I-8-2AC: 3,932 g (8.67 lb)
CN2650I-16-2AC: 4,022 g (8.87 lb)
CN2650I-8-HV-T: 3,910 g (8.62 lb)
CN2650I-16-HV-T: 3,930 g (8.66 lb)
Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
CN2650-HV-T Models: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included)
Standard Models: 0 to 55°C (32 to 131°F)
CN2650-8-2AC-T/CN2650-16-2AC-T: -40 to 75°C (40 to 167°F)
CN2650I-8-HV-T/CN2650I-16-HV-T: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
EMC
EMI
CISPR 32, FCC Part 15B Class A
EMS
AC models:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8
IEC 61000-4-11 DIPs
HVDC models:
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m
IEC 61000-4-8
Safety
Vibration
Freefall
Time
CN2610-8: 831,925 hrs
CN2610-16: 639,332 hrs
CN2610-8-2AC/CN2650-8-2AC: 773,268 hrs
CN2610-16-2AC: 604,346 hrs
CN2650-8: 657,123 hrs
CN2650-16: 457,175 hrs
CN2650-16-2AC: 442,699 hrs
CN2650I-8/CN2650I-8-2AC/CN2650-8-2AC-T: 190,562 hrs
CN2650I-16/CN2650I-16-2AC/CN2650-16-2AC-T: 115,887 hrs
CN2650I-8-HV-T: 191,326 hrs
CN2650I-16-HV-T: 116,924 hrs
Standards
Telcordia (Bellcore) Standard TR/SR
