Hardware compatibility
All computers with DVI-D and USB connections - requirement dependent
DVI-D interface
The system supports resolutions such as 480p, 720p, 1080P or WUXGA (1920 x 1200) @ 60Hz* and 24 bit color depth
* with reduced blanking
Software compatibility
All known operating systems
Computer connections at transmitter (TX)
DVI-D male, USB type A (for power only)
Display connections at receiver (RX)
DVI-D male
Power
USB powered, 5VDC -2.5W for both RX and TX units combined
Physical design
Injection moulded ABS cases:
45mm / 1.8’’ (w) x 63mm / 2.5’’(d) x 21mm / 0.8’’(h) with 30cm / 12” pigtails, Weight 250g / 0.6 lb per pair
Operating temperature
0 to 40ºC / 32 to 104ºF
Approvals
CE, FCC
Important extension distance Information
Recommended cables are CAT7 shielded foiled twisted pairs:
Daetwyler 7702 Flexible patch cable
Daetwyler 7120 Bulk cable
Category 6 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
| Resolution | Frequency | Patch Connections | Cable Type
| Distance |
|
1920x1200 |
60Hz |
0 |
CAT7 |
50 metres |
|
1920x1200 |
60Hz |
0 |
CAT6a (shielded) |
50 metres |
|
1920x1200 |
60Hz |
2 |
CAT6a (shielded) |
40 metres |
|
1920x1200 |
60Hz |
2 |
CAT7 |
40 metres |
Note:Distances are achieved using single lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5 meters. Preferably patch cables should be of type CAT7 and less than 2 meters. Patch cables over 2 meters must be CAT7.
