Pliivaba tina 1mm 500G SnCu0,7NiGe Kristall511 SN100C
Võta ühendust
Tellimused ja päringud
info@yeint.eeTehniline informatsioon ja projektid
Teet Juhanson teet.juhanson@yeint.eeKaal | 500 g |
---|---|
Mõõtühik | roll |
Tootekood | 810917 |
Osa number | 810917 |
Kaubamärk | STANNOL |
Estonia
Tellimuse järgi
Product sold in batches of 20 roll.
DESCRIPTION
SN100C is a silver-free, eutectic lead-free solder, based on Sn99.3Cu0.7 and conforms analogous to ISO 9453:2006 (alloy number 401) with micro-alloyed additives (<500ppm). The SN100C has been developed and patented by NIHON Superior, licenced and produced by STANNOL. This solder shows due to his formulation with micro alloying elements like nickel and germanium unique properties in all applications.
The SN100C alloy is a micro alloyed solder, based on the eutectic Sn99.3Cu0.7 alloy. This world-wide accepted and very often used alloy reduces the dross formation as well as the copper leaching from PCBs and components into the solder bath effectively.
Description
The Soldering Wire Kristall 511 electronics soldering wire is based on a halogen-activated "No-Clean" flux. It has been developed for high requirements for conventional soldering and for soldering SMDs in industrial production and for repair and resoldering.
The wire flux Kristall 511 is a well activated flux based on synthetic resins. it combines high activity and good flow characteristics in an outstanding way with small amounts of solid and electrically safe residues.
Product Advantages
- High activation
- Transparent residues
- Fast soldering; also on surfaces which are not optimal for soldering
- Very good dispersion
- Mild odour
Application
The Kristall 511 can be used for manual and machine soldering in the area of electrical engineering and electronics and shows its strengths where the wettability is not always optimal and the work has to be done quickly.DESCRIPTION
SN100C is a silver-free, eutectic lead-free solder, based on Sn99.3Cu0.7 and conforms analogous to ISO 9453:2006 (alloy number 401) with micro-alloyed additives (<500ppm). The SN100C has been developed and patented by NIHON Superior, licenced and produced by STANNOL. This solder shows due to his formulation with micro alloying elements like nickel and germanium unique properties in all applications.
The SN100C alloy is a micro alloyed solder, based on the eutectic Sn99.3Cu0.7 alloy. This world-wide accepted and very often used alloy reduces the dross formation as well as the copper leaching from PCBs and components into the solder bath effectively.
Description
The Soldering Wire Kristall 511 electronics soldering wire is based on a halogen-activated "No-Clean" flux. It has been developed for high requirements for conventional soldering and for soldering SMDs in industrial production and for repair and resoldering.
The wire flux Kristall 511 is a well activated flux based on synthetic resins. it combines high activity and good flow characteristics in an outstanding way with small amounts of solid and electrically safe residues.
Product Advantages
- High activation
- Transparent residues
- Fast soldering; also on surfaces which are not optimal for soldering
- Very good dispersion
- Mild odour