Akutrell Panasonic, Dual voltage 14.4/18V, brushless, ilma laadija ja akuta
Võta ühendust
Tellimused ja päringud
info@yeint.eeTehniline informatsioon ja projektid
Jüri Napp juri.napp@yeint.eeKaal | 2.367 kg |
---|---|
Mõõtühik | tk |
Tootekood | PANEY74A2X |
Osa number | EY74A2X |
Kaubamärk | PANASONIC |
Estonia
Tellimuse järgi
Battery capacity accord. to IEC (technology) | 5.0Ah (Li-ion) | 3.0Ah (Li-ion) | * | ||||||||||||||||||||||||||||||||||||||||||
Charging time (usable / full) | 65 / 80min. | 45 / 60min. | * | ||||||||||||||||||||||||||||||||||||||||||
Speed at no load in rpm |
low 20 - 480 high 70 - 1.580 |
low 20 - 480 high 70 - 1.580 |
* | ||||||||||||||||||||||||||||||||||||||||||
Max. torque (stalling / instant torque) | 32 / 50Nm | 32 / 50Nm | * | ||||||||||||||||||||||||||||||||||||||||||
Clutch torque | 0.5 - 4.4Nm | 0.5 - 4.4Nm | * | ||||||||||||||||||||||||||||||||||||||||||
Clutch stages | 18 + drill position | 18 + drill position | * | ||||||||||||||||||||||||||||||||||||||||||
Max. drilling diameter (in wood / in metal) | 38 / 13mm | 38 / 13mm | * | ||||||||||||||||||||||||||||||||||||||||||
Max. holesaw size (in wood / in metal) | - / 33mm | - / 33mm | * | ||||||||||||||||||||||||||||||||||||||||||
Size (W x L x B) | 68 x 178 x 250mm | 68 x 178 x 234mm | * | ||||||||||||||||||||||||||||||||||||||||||
Weight (incl. battery) | 2.05kg | 1.8kg | * | ||||||||||||||||||||||||||||||||||||||||||
|
Ultra compact body allows use un restricted spaces
For more efficient work in narrow spaces, our new shorter motor design, gears, and chucks dramatically shorten the tool body. Saving 25mm against our existing drill driver EY74A1.
Powerful to the finish
The new, large diameter brushless motors generate high power and efficiency (32Nm of torque - 18V battery). Plus the newly designed control circuit increases stable current flow to motor by more than 70%*. This enables high power output to be evenly maintained until the task is completed even during high-load operation.
* Compared with previous brushless motor.
Compact with high power for increased versatility | |
---|---|
New brushless motor
New brushless motor
Without brushes and commutator which can reduce the lifetime of the tool, the motor lasts approx. twice compared with brushed motor*.
* Compared with Panasonic conventional brushed motor
New ultra hard chuck jaw tips
We increased durability of every part right down to the new metal chuck which features tungsten carbide jaw tips. These extra hardened inserts are brazed into each jaw to give extra ‘bite strength’ and substantially reduce wear.
New hybrid switch
To eliminate heavy friction to internal parts of the switch during use of electric brake, we developed a new semi-electronic switch. This gives smoother operation and double* the life expectancy of the part.
* Compared with Panasonic conventional switches
Tough IP: Battery protection*
Individual monitoring of battery cells allows power supply to automatically cut off before over-discharge (excessive use), overheating, or overcurrent (excessive load). Switch and electronics circuits of control panel and battery pack are covered by an urethane layer to give high levels of dust and water protection.
* TOUGH IP = INTELLIGENT POWER TOOL
Speed control function enables perfect finishing
New “Speed Control Function” reduces ‘run out’ for metal hole saw
This new function allows the user to select from three different low rotation speed settings (H / M / S), based on allowable maximum speeds* for metal hole saws. It greatly reduces ‘run out’ when using metal hole saws and prevents surface scorching on stainless steel and other materials.
Screw without speed control function |
Screw with speed control function |
Speed control function enables perfect finishing - Table
Rotation speed |
LOW |
Application Example (Metal holesaw) |
High | |
---|---|---|---|---|
H | 300rpm |
Normal steel: φ 15-25 Stainless steel: φ 10-15 |
1000rpm |
Precise Screwing |
M | 200rpm |
Normal steel: φ 25- Stainless steel: φ 15-25 |
670rpm | |
L | 150rpm |
Normal steel: φ 30- Stainless steel: φ 20- |
500rpm |
* Different ‘allowable maximum speeds’ are determined for metal hole saws depending on diameter and target material. See websites of metal hole saw manufacturers for further details.
Increased efficiency and flexibility
“SMOOTH START” electronics allow easy, precise speed control
New advanced speed control electronics start rotation speed gradually. This enables very slow and smooth starts allowing ultimate control when starting drilling or working with small screws in precise applications.
Fresh new ‘CARBON’ design
To enhance the internal engineering and technology developments, a fresh new body design and material finish has been developed. With the unique carbon fibre textured finish and new comfort grip, style is added to substance with improved ergonomics too.
Various support design | |
---|---|
New grip pattern design to prevent slipping and increase operator comfort |
LED Light |
Elastomer Bumper Increased amounts of rubber and resin coating at the bottom of the tool helps prevent damage if dropped from elevated areas. |
Battery capacity accord. to IEC (technology) | 5.0Ah (Li-ion) | 3.0Ah (Li-ion) | * | ||||||||||||||||||||||||||||||||||||||||||
Charging time (usable / full) | 65 / 80min. | 45 / 60min. | * | ||||||||||||||||||||||||||||||||||||||||||
Speed at no load in rpm |
low 20 - 480 high 70 - 1.580 |
low 20 - 480 high 70 - 1.580 |
* | ||||||||||||||||||||||||||||||||||||||||||
Max. torque (stalling / instant torque) | 32 / 50Nm | 32 / 50Nm | * | ||||||||||||||||||||||||||||||||||||||||||
Clutch torque | 0.5 - 4.4Nm | 0.5 - 4.4Nm | * | ||||||||||||||||||||||||||||||||||||||||||
Clutch stages | 18 + drill position | 18 + drill position | * | ||||||||||||||||||||||||||||||||||||||||||
Max. drilling diameter (in wood / in metal) | 38 / 13mm | 38 / 13mm | * | ||||||||||||||||||||||||||||||||||||||||||
Max. holesaw size (in wood / in metal) | - / 33mm | - / 33mm | * | ||||||||||||||||||||||||||||||||||||||||||
Size (W x L x B) | 68 x 178 x 250mm | 68 x 178 x 234mm | * | ||||||||||||||||||||||||||||||||||||||||||
Weight (incl. battery) | 2.05kg | 1.8kg | * | ||||||||||||||||||||||||||||||||||||||||||
|
Ultra compact body allows use un restricted spaces
For more efficient work in narrow spaces, our new shorter motor design, gears, and chucks dramatically shorten the tool body. Saving 25mm against our existing drill driver EY74A1.
Powerful to the finish
The new, large diameter brushless motors generate high power and efficiency (32Nm of torque - 18V battery). Plus the newly designed control circuit increases stable current flow to motor by more than 70%*. This enables high power output to be evenly maintained until the task is completed even during high-load operation.
* Compared with previous brushless motor.
Compact with high power for increased versatility | |
---|---|
New brushless motor
New brushless motor
Without brushes and commutator which can reduce the lifetime of the tool, the motor lasts approx. twice compared with brushed motor*.
* Compared with Panasonic conventional brushed motor
New ultra hard chuck jaw tips
We increased durability of every part right down to the new metal chuck which features tungsten carbide jaw tips. These extra hardened inserts are brazed into each jaw to give extra ‘bite strength’ and substantially reduce wear.
New hybrid switch
To eliminate heavy friction to internal parts of the switch during use of electric brake, we developed a new semi-electronic switch. This gives smoother operation and double* the life expectancy of the part.
* Compared with Panasonic conventional switches
Tough IP: Battery protection*
Individual monitoring of battery cells allows power supply to automatically cut off before over-discharge (excessive use), overheating, or overcurrent (excessive load). Switch and electronics circuits of control panel and battery pack are covered by an urethane layer to give high levels of dust and water protection.
* TOUGH IP = INTELLIGENT POWER TOOL
Speed control function enables perfect finishing
New “Speed Control Function” reduces ‘run out’ for metal hole saw
This new function allows the user to select from three different low rotation speed settings (H / M / S), based on allowable maximum speeds* for metal hole saws. It greatly reduces ‘run out’ when using metal hole saws and prevents surface scorching on stainless steel and other materials.
Screw without speed control function |
Screw with speed control function |
Speed control function enables perfect finishing - Table
Rotation speed |
LOW |
Application Example (Metal holesaw) |
High | |
---|---|---|---|---|
H | 300rpm |
Normal steel: φ 15-25 Stainless steel: φ 10-15 |
1000rpm |
Precise Screwing |
M | 200rpm |
Normal steel: φ 25- Stainless steel: φ 15-25 |
670rpm | |
L | 150rpm |
Normal steel: φ 30- Stainless steel: φ 20- |
500rpm |
* Different ‘allowable maximum speeds’ are determined for metal hole saws depending on diameter and target material. See websites of metal hole saw manufacturers for further details.
Increased efficiency and flexibility
“SMOOTH START” electronics allow easy, precise speed control
New advanced speed control electronics start rotation speed gradually. This enables very slow and smooth starts allowing ultimate control when starting drilling or working with small screws in precise applications.
Fresh new ‘CARBON’ design
To enhance the internal engineering and technology developments, a fresh new body design and material finish has been developed. With the unique carbon fibre textured finish and new comfort grip, style is added to substance with improved ergonomics too.
Various support design | |
---|---|
New grip pattern design to prevent slipping and increase operator comfort |
LED Light |
Elastomer Bumper Increased amounts of rubber and resin coating at the bottom of the tool helps prevent damage if dropped from elevated areas. |