Akulöökmutrikeeraja Panasonic, Panasonic, Dual voltage 14.4/18V, brushless, 2x18V 3.0Ah akut komplektis
Võta ühendust
Tellimused ja päringud
info@yeint.eeTehniline informatsioon ja projektid
Jüri Napp juri.napp@yeint.eeKaal | 2.367 kg |
---|---|
Mõõtühik | tk |
Tootekood | PANEY75A7PN2G |
Osa number | EY75A7PN2G |
Kaubamärk | PANASONIC |
Estonia
Tellimuse järgi
Advanced ergonomics - best handling | ||
---|---|---|
The all new shorter brushless motor helped designers to achieve our most compact high power impact driver with optimum centre-balanced ergonomics for more comfortable working…even in narrow spaces. |
Ultra compact body for use in restricted spaces | ||
---|---|---|
NEW SELF DRILLING SCREW MODE New function “Self Drilling Screw mode” starts at highest speed to cut hole and then transfers to ‘H mode’ (High impact) to powerfully cut initial thread. After that, load is reduced so it automatically switches to slower ‘S mode’ (Soft impact) to limit potential of stripping threads on fastener or material. (Less than φ4×15mm). |
Multiple modes for all applications | ||
---|---|---|
Hard: Fastening long bit & bolt |
Medium: Fastening for furniture |
Soft: Fastening for plaster board |
Self drilling screw mode |
Increased accuracy, smoother fastening
Improved drivetrain design prevents from center run-out and reduces damage to screws even with high speed fastening of long screws.
1: Hammer
With optimal tuning of the compression spring and intelligent motor, the EY75A7 avoids ineffective impacting, reducing damage to the screw as well as noise and vibration.
2: Improved bearing design
New bearing design on the driveshaft greatly reduces ‘center run-out’, improving accuracy and allowing smoother driving. Amplitude of vibration: 1.4mm* with 110mm long screw. *Internal test result
3: Smooth Speed Control
Improvements to the tuning of control electronics in the switch enable smoother operation during light or heavy use.
Robust build for heavy-duty use
Battery capacity in M12 high-tensile bolt: more than 30.000 pcs *1
“Powerful and Compact “New Brushless Motor
Approx. 200%*2 more life cycles, thanks to new brushless motor development. Also, thicker motor shaft (φ5mm) ensures more strength for heavy-duty use.
Durable Switch
Hybrid switch unit uses rigid metal parts in the trigger to greatly strengthen giving 200% more durability *3.
Robust Anvil
*1: Panasonic test result by M12 High-strength bolt (2sec)
*2: Compared with our previous brushless motor
*3: Compared with our previous mechanical switch
Increased housing durability
To increase housing durability, metal plates have been added where the battery locks into the tool. This helps prevent wear and damage caused by abrasion and vibration during heavy use.
Fresh new ‘CARBON’ design
To enhance the internal engineering and technology developments, a fresh new body design and material finish has been developed. With the unique carbon fiber textured finish and new comfort grip, style is added to substance with improved ergonomics too.
Various support design | ||
---|---|---|
New grip pattern design to prevent slipping and increase operator comfort |
New tapered Bit-holder design for easy bit change |
LED Light |
Elastomer Bumper Increased amounts of rubber and resin coating at the bottom of the tool help prevent damage if dropped from elevated areas. |
Battery capacity accord. to IEC (technology) | 5.0Ah (Li-ion) | 3.0Ah (Li-ion) | * |
Charging time (usable / full) | 65 / 80min. | 45 / 60min. | * |
Max. torque |
low 26Nm middle 120Nm high 160Nm |
low 26Nm middle 120Nm high 160Nm |
* |
Speed at no load in rpm |
low 0 - 950 middle 0 - 1.450 high 0 - 2.500 |
low 0 - 950 middle 0 - 1.450 high 0 - 2.500 |
* |
Inpact in rpm |
low 0 - 1.900 middle 0 - 2.900 high 0 - 3.100 |
low 0 - 1.900 middle 0 - 2.900 high 0 - 3.100 |
* |
Max. Screw driving Standard tensil bolt t=10mm High tensil bolt t=10mm |
M6 - M16 M6 - M12 |
M6 - M16 M6 - M12 |
* |
Clutch stages | x | x | * |
Size (W x L x B) | 66 x 118 x 242mm | 66 x 118 x 226mm | * |
Weight (incl. battery) | 1.7kg | 1.5kg | * |
Wood screws in yellow pine | Ø 4.2mm x 75mm | 700 | 420 |
Self-drilling screws in SPC | Ø 4mm x 13mm t = 1.6mm | 980 | 590 |
Standard tensil bolt | M16 x 25mm t = 10mm | 1.150 | 680 |
Standard tensil bolt | M12 x 25mm t = 10mm | 2.700 | 1.600 |
High tensil bolt | M12 x 25mm t = 10mm | 360 | 220 |
Advanced ergonomics - best handling | ||
---|---|---|
The all new shorter brushless motor helped designers to achieve our most compact high power impact driver with optimum centre-balanced ergonomics for more comfortable working…even in narrow spaces. |
Ultra compact body for use in restricted spaces | ||
---|---|---|
NEW SELF DRILLING SCREW MODE New function “Self Drilling Screw mode” starts at highest speed to cut hole and then transfers to ‘H mode’ (High impact) to powerfully cut initial thread. After that, load is reduced so it automatically switches to slower ‘S mode’ (Soft impact) to limit potential of stripping threads on fastener or material. (Less than φ4×15mm). |
Multiple modes for all applications | ||
---|---|---|
Hard: Fastening long bit & bolt |
Medium: Fastening for furniture |
Soft: Fastening for plaster board |
Self drilling screw mode |
Increased accuracy, smoother fastening
Improved drivetrain design prevents from center run-out and reduces damage to screws even with high speed fastening of long screws.
1: Hammer
With optimal tuning of the compression spring and intelligent motor, the EY75A7 avoids ineffective impacting, reducing damage to the screw as well as noise and vibration.
2: Improved bearing design
New bearing design on the driveshaft greatly reduces ‘center run-out’, improving accuracy and allowing smoother driving. Amplitude of vibration: 1.4mm* with 110mm long screw. *Internal test result
3: Smooth Speed Control
Improvements to the tuning of control electronics in the switch enable smoother operation during light or heavy use.
Robust build for heavy-duty use
Battery capacity in M12 high-tensile bolt: more than 30.000 pcs *1
“Powerful and Compact “New Brushless Motor
Approx. 200%*2 more life cycles, thanks to new brushless motor development. Also, thicker motor shaft (φ5mm) ensures more strength for heavy-duty use.
Durable Switch
Hybrid switch unit uses rigid metal parts in the trigger to greatly strengthen giving 200% more durability *3.
Robust Anvil
*1: Panasonic test result by M12 High-strength bolt (2sec)
*2: Compared with our previous brushless motor
*3: Compared with our previous mechanical switch
Increased housing durability
To increase housing durability, metal plates have been added where the battery locks into the tool. This helps prevent wear and damage caused by abrasion and vibration during heavy use.
Fresh new ‘CARBON’ design
To enhance the internal engineering and technology developments, a fresh new body design and material finish has been developed. With the unique carbon fiber textured finish and new comfort grip, style is added to substance with improved ergonomics too.
Various support design | ||
---|---|---|
New grip pattern design to prevent slipping and increase operator comfort |
New tapered Bit-holder design for easy bit change |
LED Light |
Elastomer Bumper Increased amounts of rubber and resin coating at the bottom of the tool help prevent damage if dropped from elevated areas. |
Battery capacity accord. to IEC (technology) | 5.0Ah (Li-ion) | 3.0Ah (Li-ion) | * |
Charging time (usable / full) | 65 / 80min. | 45 / 60min. | * |
Max. torque |
low 26Nm middle 120Nm high 160Nm |
low 26Nm middle 120Nm high 160Nm |
* |
Speed at no load in rpm |
low 0 - 950 middle 0 - 1.450 high 0 - 2.500 |
low 0 - 950 middle 0 - 1.450 high 0 - 2.500 |
* |
Inpact in rpm |
low 0 - 1.900 middle 0 - 2.900 high 0 - 3.100 |
low 0 - 1.900 middle 0 - 2.900 high 0 - 3.100 |
* |
Max. Screw driving Standard tensil bolt t=10mm High tensil bolt t=10mm |
M6 - M16 M6 - M12 |
M6 - M16 M6 - M12 |
* |
Clutch stages | x | x | * |
Size (W x L x B) | 66 x 118 x 242mm | 66 x 118 x 226mm | * |
Weight (incl. battery) | 1.7kg | 1.5kg | * |
Wood screws in yellow pine | Ø 4.2mm x 75mm | 700 | 420 |
Self-drilling screws in SPC | Ø 4mm x 13mm t = 1.6mm | 980 | 590 |
Standard tensil bolt | M16 x 25mm t = 10mm | 1.150 | 680 |
Standard tensil bolt | M12 x 25mm t = 10mm | 2.700 | 1.600 |
High tensil bolt | M12 x 25mm t = 10mm | 360 | 220 |