Mõõtekomplekt Laserkaugusmõõtja 414D/termomeeter 62MAX+

Fluke 414D/62 MAX+ laserkaugusmõõtja/infrapunatermomeetri kombikomplekt

Kõige vastupidavam Fluke 62 MAX+ IR-termomeeter koos lihtsasti kasutatava 414D laserkaugusmõõturiga sisaldab kõike, mida vajate paigutuse seadistamiseks ja elektri-/vahetusprobleemide kiireks kõrvaldamiseks. Kasutage IR-termomeetrit elektriseadmete ja HVAC-komponentide ülekuumenemise kontrollimiseks ning kasutage laserkaugusmõõtjat ruumi konfiguratsiooni jaoks kauguse, pindala ja ruumala määramiseks.

Fluke 414D/62 MAX+ Laser Distance Meter/Infrared Thermometer Combo Kit

Fluke 414D Laser Distance Meter

Distance Measurement

Typical Measuring Tolerance ¹ ±2.0 mm ³

Maximum Measuring Tolerance ² ±3.0 mm ³

Range At Leica Target Plate GZM26 50 m / 165 ft

Typical Range ¹ 40 m / 130 ft

Range At Unfavorable Condition 4 35 m / 115 ft

Smallest Unit Displayed 1 mm / 1/16 in

Ø Laser Point At Distances 6 / 30 / 60 mm

(10 / 50 / 100 m)

Tilt Measurement

Measuring Tolerance To Laser Beam 5 No

Measuring Tolerance To Housing 5 No

Range No

General

Laser Class 2

Laser Type 635 nm, < 1 mW

Protection Class IP40

Automatic Laser Off After 90 seconds

Automatic Power Off After 180 seconds

Battery Life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 3,000 measurements

Size (L x W x D) 116 x 53 x 33 mm

Weight (with batteries) 113 g

Temperature Range:

Storage Operation -25 °C to +70 °C (-13 °F to +158 °F)

0 °C to +40 °C (32 °F to +104 °F)

Calibration Cycle Not applicable

Maximum Altitude 3000 m

Maximum Relative Humidity 85% at 20 °F to 120 °F (-7 °C to 50 °C)

Safety IEC Standard No. 61010-1:2001

EN60825-1:2007 (Class II)

EMC EN 55022:2010

EN 61000-4-3:2010

EN 61000-4-8:2010

1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25 °C.

2. Applies for 10 to 500% target reflectivity, high background illumination, -10 °C to +50 °C.

3. Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m.

4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux.

5. After user calibration. Additional angle related deviation of ±0.01 ° per degree up to ±45 ° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1 °

Fluke 62 MAX+ Infrared Thermometer

Specifications

Temperature Range -30 °C to 650 °C (-22 °F to 1202 °F)

Accuracy ±1.0 °C or ±1.0% of reading, whichever is greater

-10 °C to 0 °C: ±2.0

-30 °C to -10 °C: ±3.0

Response Time (95%) Fluke 62 MAX+ < 300 ms (95% of reading)

Spectral response 8 to 14 microns

Emissivity 0.10 to 1.00

Optical Resolution 12:1 (calculated at 90% energy)

Display Resolution 0.1 °C (0.2 °F)

Repeatability Of Readings ±0.5% of reading or < ±0.5 °C (1 °F), whichever is greater

Power AA battery

Battery Life 8 hours with laser and backlight on

Physical Specifications

Weight 255 g (8.99 oz)

Size (L x W x D) 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)

Operating Temperature 0 °C to 50 °C (32 °F to 122 °F)

Storage Temperature (Without Battery) -20 °C to 60 °C (-4 °F to 140 °F)

Operating Humidity 10% to 90% RH non-condensing at 30 °C (86 °F)

Operating Altitude 2000 meters above mean sea level

Storage Altitude 12,000 meters above mean sea level

IP Rating IP 54 per IEC 60529

Drop Test 3 meters

Vibration And Shock IEC 68-2-6 2.5 g, 10 to 200 Hz

IEC 68-2-27, 50 g, 11 ms

EMC EN 61326-1:2006

EN 61326-2:2006

Standards And Agency Approval

Compliance EN/IEC 61010-1: 2001

Laser Safety FDA and EN 60825-1 Class II