Digitaalne ostsilloskoop 7´´ 4-Ch 50MHz

Laos
Tootekood: GDS-1054B
585,60 € 480,00 € Hind ilma km Hind koos km

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Keio Kalm keio.kalm@yeint.ee
+372 564 79201
Kaal 6 kg
Mõõtühik tk
Tootekood GDS-1054B
Osa number GDS-1054B
Kaubamärk GW Instek

Estonia

Tellimuse järgi

0,00 € 0,00 € Hind ilma km Hind koos km
Tehniline info
GDS-1000B Specifications
GDS-1054B 

Channels 4
Bandwidth DC ~ 50MHz (–3dB)
Rise Time 5ns
Bandwidth Limit 20MHz

GDS-1072B 

Channels 2 + Ext
Bandwidth DC ~ 70MHz (–3dB)
Rise Time 5ns
Bandwidth Limit 20MHz

GDS-1074B 

Channels 4
Bandwidth DC ~ 70MHz (–3dB)
Rise Time 5ns
Bandwidth Limit 20MHz

GDS-1102B 

Channels 2 + Ext
Bandwidth DC ~ 100MHz (–3dB)
Rise Time 3.5ns
Bandwidth Limit 20MHz

GDS-1104B 

Channels 4
Bandwidth DC ~ 100MHz (–3dB)
Rise Time 3.5ns
Bandwidth Limit 20MHz

 Vertical Vertical Sensitivity Resolution 8 bit :1mV*~10V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
DC Gain Accuracy* ±3%
Polarity Normal & Invert
Maximum Input Voltage 300Vrms, CAT I
(300Vrms CAT II with GTP-070B- 4/100B-4 10:1 probe)
Offset Position Range 1mV/div : ±1.25V
2mV/div ~ 100mV/div : ±2.5V
200mV/div ~ 10V/div : ±125V
Waveform Signal Process Plus, -, ×, ÷, FFT, FFTrms, User Defined Expression
FFT: Spectral magnitude. Set FFT Vertical Scale to
Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman-
Harris
 Trigger Source CH1, CH2, CH3*, CH4*, Line, EXT**
*four channel models only.
**two channel models only.
Trigger Mode Auto (supports Roll Mode for 100 ms/div and
slower), Normal, Single Sequence
Trigger Type Edge, Pulse Width, Video, Pulse Runt, Rise & Fall,
Timeout, Alternate, Event-Delay(1~65535 events),
Time-Delay(Duration, 4nS~10S), Bus
Holdoff range 4ns to 10s
Coupling AC, DC, LF rej., Hf rej., Noise rej.
Sensitivity 1div
External Trigger Range ±15V
Sensitivity DC ~ 100MHz Approx. 100mV
100MHz ~ 200MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal Time base Range 5ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 2,000,000 div maximum
Timebase Accuracy ±50 ppm over any ≥ 1 ms time interval
Real Time Sample Rate 1GSa/s max.
Record Length Max. 10Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection 2nS (typical)
Average selectable from 2 to 256
X-Y Mode X-Axis Input Channel 1; Channel 3*
*four channel models only
Y-Axis Input Channel 2; Channel 4*
*four channel models only
Phase Shift ±3° at 100kHz
 Cursors and Measurement Cursors Amplitude, Time, Gating available; Unit:
Seconds(s), Hz(1/s), Phase(degree), Ration(%)
  Automatic Measurement 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low,
Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot,
FPREShoot, Frequency, Period, RiseTime, FallTime,
+Width, -Width, Duty Cycle, +Pulses, -Pulses,
+Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF,
LFR, LFF, Phase
  Cursors measurement Voltage difference between cursors ( ΔV) Time
difference between cursors ( ΔT)
  Auto counter 6 digits, range from 2Hz minimum to the rated
bandwidth
Control Panel Function Autoset Single-button, automatic setup of all channels for
vertical, horizontal and trigger systems, with undo
Autoset
Save Setup 20set
Save Waveform 24set
 Display TFT LCD Type 7" TFT WVGA color display
Display Resolution 800 horizontal × 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform Display Dots, vectors, variable persistence (16ms~4s),
infinite persistence
Waveform Update Rate 50,000 waveforms per second, maximum
Display Graticule 8 x 10 divisions
Display Mode YT, XY
Interface USB Port USB 2.0 High-speed host port X1, USB High-speed
2.0 device port X1
Ethernet Port(LAN) RJ-45 connector, 10/100Mbps with HP
Auto-MDIX (Only for the GDS-1054B, GDS-1074B, GDS-1104B.)
Go-NoGo BNC 5V Max/10mA TTL open collector output
Kensington Style Lock Rear-panel security slot connects to standard
Kensington-style lock
Miscellaneous Multi-language menu Available
  Operation Environment Temperature: 0°C to 50°C. Relative Humidity
≤80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
  On-line help Available
  Dimensions 380mmX208mmX127.3mm
  Weight 2.8kg
Tehniline info
GDS-1000B Specifications
GDS-1054B 

Channels 4
Bandwidth DC ~ 50MHz (–3dB)
Rise Time 5ns
Bandwidth Limit 20MHz

GDS-1072B 

Channels 2 + Ext
Bandwidth DC ~ 70MHz (–3dB)
Rise Time 5ns
Bandwidth Limit 20MHz

GDS-1074B 

Channels 4
Bandwidth DC ~ 70MHz (–3dB)
Rise Time 5ns
Bandwidth Limit 20MHz

GDS-1102B 

Channels 2 + Ext
Bandwidth DC ~ 100MHz (–3dB)
Rise Time 3.5ns
Bandwidth Limit 20MHz

GDS-1104B 

Channels 4
Bandwidth DC ~ 100MHz (–3dB)
Rise Time 3.5ns
Bandwidth Limit 20MHz

 Vertical Vertical Sensitivity Resolution 8 bit :1mV*~10V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
DC Gain Accuracy* ±3%
Polarity Normal & Invert
Maximum Input Voltage 300Vrms, CAT I
(300Vrms CAT II with GTP-070B- 4/100B-4 10:1 probe)
Offset Position Range 1mV/div : ±1.25V
2mV/div ~ 100mV/div : ±2.5V
200mV/div ~ 10V/div : ±125V
Waveform Signal Process Plus, -, ×, ÷, FFT, FFTrms, User Defined Expression
FFT: Spectral magnitude. Set FFT Vertical Scale to
Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman-
Harris
 Trigger Source CH1, CH2, CH3*, CH4*, Line, EXT**
*four channel models only.
**two channel models only.
Trigger Mode Auto (supports Roll Mode for 100 ms/div and
slower), Normal, Single Sequence
Trigger Type Edge, Pulse Width, Video, Pulse Runt, Rise & Fall,
Timeout, Alternate, Event-Delay(1~65535 events),
Time-Delay(Duration, 4nS~10S), Bus
Holdoff range 4ns to 10s
Coupling AC, DC, LF rej., Hf rej., Noise rej.
Sensitivity 1div
External Trigger Range ±15V
Sensitivity DC ~ 100MHz Approx. 100mV
100MHz ~ 200MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal Time base Range 5ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 2,000,000 div maximum
Timebase Accuracy ±50 ppm over any ≥ 1 ms time interval
Real Time Sample Rate 1GSa/s max.
Record Length Max. 10Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection 2nS (typical)
Average selectable from 2 to 256
X-Y Mode X-Axis Input Channel 1; Channel 3*
*four channel models only
Y-Axis Input Channel 2; Channel 4*
*four channel models only
Phase Shift ±3° at 100kHz
 Cursors and Measurement Cursors Amplitude, Time, Gating available; Unit:
Seconds(s), Hz(1/s), Phase(degree), Ration(%)
  Automatic Measurement 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low,
Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot,
FPREShoot, Frequency, Period, RiseTime, FallTime,
+Width, -Width, Duty Cycle, +Pulses, -Pulses,
+Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF,
LFR, LFF, Phase
  Cursors measurement Voltage difference between cursors ( ΔV) Time
difference between cursors ( ΔT)
  Auto counter 6 digits, range from 2Hz minimum to the rated
bandwidth
Control Panel Function Autoset Single-button, automatic setup of all channels for
vertical, horizontal and trigger systems, with undo
Autoset
Save Setup 20set
Save Waveform 24set
 Display TFT LCD Type 7" TFT WVGA color display
Display Resolution 800 horizontal × 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform Display Dots, vectors, variable persistence (16ms~4s),
infinite persistence
Waveform Update Rate 50,000 waveforms per second, maximum
Display Graticule 8 x 10 divisions
Display Mode YT, XY
Interface USB Port USB 2.0 High-speed host port X1, USB High-speed
2.0 device port X1
Ethernet Port(LAN) RJ-45 connector, 10/100Mbps with HP
Auto-MDIX (Only for the GDS-1054B, GDS-1074B, GDS-1104B.)
Go-NoGo BNC 5V Max/10mA TTL open collector output
Kensington Style Lock Rear-panel security slot connects to standard
Kensington-style lock
Miscellaneous Multi-language menu Available
  Operation Environment Temperature: 0°C to 50°C. Relative Humidity
≤80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
  On-line help Available
  Dimensions 380mmX208mmX127.3mm
  Weight 2.8kg

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Keio Kalm keio.kalm@yeint.ee
+372 564 79201