Switch: 8 x 10/100/1000BaseT(X), 12 x SFP, -40 kuni 80°C, manageeritav, DIN
Pilt on illustratiivne
Part nr: LNX-2012GN-SFP-T
Tootekood: ANTLNX2012GNSFPT
Tootja: Antaira Technologies, LLC
Ühik: tk
Müügipakend: 1
Garantii: 60 kuud
Kaal: 1.22 kg
Saadavus: Tellimisel
Tarneaeg 5-15
Mahub pakiautomaati: Jah
Hind ilma km: 1505.00€
Lisa ostukorvi

Antaira’s LNX-2012GN-SFP is a 20-port industrial Gigabit managed Ethernet switch embedded with 8*10/100/1000Tx Ethernet ports, and 12*100/1000 dual rate SFP slots for Gigabit fiber connections. It is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard protocol. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, RMON, ModbusTCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The LNX-2012GN-SFP is IP30 rated, DIN-rail mountable, and supports a standard operating temperature range of -40 to 75C. It also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS, or any other outdoor or harsh environment.


  • 8* 10/100/1000Tx Gigabit ports and 12*100/1000 SFP ports
  • Jumbo frame up to 9K Bytes
  • Redundant Ring (recovery time < 20ms over 250 units of connection), MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy
  • Supports IP based bandwidth management
  • Supports application based QoS management
  • Supports IP police security function
  • Supports DOS/DDOS auto prevention
  • Supports DDM (Digital Diagnostic Monitoring) function (P1 ~ P8)
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Supports SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network Management
  • Support ACL, 802.1x User Authentication for security
  • Multiple notification for warning of unexpected event
  • Configurable by Web-based interface, Telnet and Console (CLI)
  • Supports LLDP Protocol
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
  • Included

    • 1 - DC cable - 18 AWG & DC jack 5.5x2.1mm
    • 1 - Product CD
    • 2 - Wall mounting brackets and screws
    • LNX-2012GN-SFP-T
Certifications FCC, CE, UL/cUL 508, ISA 12.12.01
Dimensions 96.4 x 154 x 105.5 mm
EMS IEC61000-4-2,3,4,5,6,8,11
Ethernet Port 8*RJ45 Ports w/ 10/100/1000Tx
Fiber Port 12*100/1000 SFP Slot
Flow Control IEEE 802.3x for full duplex mode,
backpressure for half duplex mode
Housing Metal, IP30 Protection
Input Voltage 12~48VDC, Redundant Input
Jumbo Frame 9.6Kbytes
MAC Table Size 8K
Mounting DIN-Rail and Wall Mounting
Operating Temperature EOT: -40C to 75C
Overload Current Protection Present
Packet Buffer 4 Mbits
Power Connection 1 Removable 6-Contact Terminal Block
Power Consumption 10 Watts
Processing Type Store and Forward
Reverse Polarity Power Protection Present
Shock/Vibration/Free Fall IEC60068-2-27,6,32
Standards IEEE 802.3 10BaseTx Ethernet
IEEE 802.3u 100BaseTx Fast Ethernet
IEEE 802.3ab 1000BaseTx
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control for Full Duplex
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1x for Network Authentication
IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
Storage Temperature -40C to 85C
Switching Architecture Back-Plane (Switching Fabric): 40.0Gbps
Technology Protocol CSMA/CD
Transfer Rate 14,880pps for Ethernet Port
148,800pps for Fast Ethernet Port
1,488,000pps for Gigabit Ethernet Port
Warranty 5 Years
Abi ja Info
Meie brändid
Uued tooted

Lühendatud lahtiolekuaeg