Toimub laadimine... 
Manageeritav SHDSL võrgu laiendaja koos switchiga: 1 x 10/100BaseT(x), 1 x DSL, -40 kuni 75 °C
Võta ühendust
Tellimused ja päringud
info@yeint.eeTehniline informatsioon ja projektid
Ott-Kaarel Purru ott-kaarel.purru@yeint.ee| Kaal | 0 g |
|---|---|
| Mõõtühik | tk |
| Tootekood | MOX300110 |
| Osa number | IEX-402-SHDSL-T |
| Kaubamärk | MOXA |
Estonia
Tellimuse järgi
Tehniline info ja lisad
Automatic CO/CPE negotiation reduces configuration time
Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain
LED indicators to simplify troubleshooting
Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview
Introduction
The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps and a long transmission distance of up to 3 km.
The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications.
To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting.
Additional Features and Benefits
-
Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km transmission distance (performance varies by cable quality)
-
Moxa proprietary Turbo Speed connections up to 15.3 Mbps
-
Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery
-
Supports SNMP v1/v2c/v3 for different levels of network management
-
Interoperable with Turbo Ring and Turbo Chain network redundancy
-
Support Modbus TCP protocol for device management and monitoring
-
Compatible with EtherNet/IP and PROFINET protocols for transparent transmission
-
IPv6 Ready
-
10/100BaseT(X) Ports (RJ45 connector)
1
Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection -
Combo Port, RJ-11 (RJ45 connector) or Detachable 2-Contact Terminal Block
1
-
Standards
IEEE 802.1p for Class of Service
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for flow control
IEX-402-VDSL2 Series: ITU G.993.2
IEX-402-SHDSL Series: ITU-T G.991.2
-
Management
SNMPv1/v2c/v3, Modbus TCP, Back Pressure Flow Control, DHCP Client, HTTP, LLDP, Syslog, Telnet, TFTP
-
MIB
MIB-II
-
Time Management
SNTP
-
MAC Table Size
1 K
-
Packet Buffer Size
512 kbits
-
LED Indicators
PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port)
-
Console Port
RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)
-
Ethernet Interface
All models: CO/CPE, SNR/SPEED
IEX-402-VDSL2 Series: STD/INP
IEX-402-SHDSL Series: ANNEX B/ANNEX A, STD/TURBO
-
Power Connector
2 removable 2-contact terminal block(s)
-
Input Voltage
12/24/48 VDC, 9.6 to 60 VDC
-
Input Current
IEX-402-SHDSL Series: 0.388 A @ 12 VDC, 0.196 A @ 24 VDC, 0.097 A @ 48 VDC
IEX-402-VDSL2 Series: 0.34 A @ 24 VDC -
Overload Current Protection
Supported
-
Reverse Polarity Protection
Supported
-
Housing
Metal
-
IP Rating
IP30
-
Dimensions
35 x 130 x 105 mm (1.38 x 5.12 x 4.13 in)
-
Weight
IEX-402-SHDSL Series: 290 g (0.64 lb)
IEX-402-VDSL2 Series: 275 g (0.61 lb) -
Installation
DIN-rail mounting, Rack mounting (with optional kit)
-
Altitude
2000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
-
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) -
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
5 to 95% (non-condensing)
-
Safety
UL 508
-
Hazardous Locations
IEX-402-VDSL2 Series: ATEX, Class I Division 2
-
EMC
EN 55032/24
-
EMI
CISPR 32, FCC Part 15B Class A
-
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF -
Traffic Control
IEX-402-VDSL2 Series: NEMA TS2
-
Railway
EN 50121-4
-
Shock
IEC 60068-2-27
-
Freefall
IEC 60068-2-32
-
Vibration
IEC 60068-2-6
-
Time
IEX-402-SHDSL Series: 1,311,455 hrs
IEX-402-VDSL2 Series: 1,498,312 hrs -
Standards
Telcordia (Bellcore), GB
-
Warranty Period
5 years
Automatic CO/CPE negotiation reduces configuration time
Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain
LED indicators to simplify troubleshooting
Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview
Introduction
The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps and a long transmission distance of up to 3 km.
The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications.
To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting.
Additional Features and Benefits
-
Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km transmission distance (performance varies by cable quality)
-
Moxa proprietary Turbo Speed connections up to 15.3 Mbps
-
Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery
-
Supports SNMP v1/v2c/v3 for different levels of network management
-
Interoperable with Turbo Ring and Turbo Chain network redundancy
-
Support Modbus TCP protocol for device management and monitoring
-
Compatible with EtherNet/IP and PROFINET protocols for transparent transmission
-
IPv6 Ready
-
10/100BaseT(X) Ports (RJ45 connector)
1
Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection -
Combo Port, RJ-11 (RJ45 connector) or Detachable 2-Contact Terminal Block
1
-
Standards
IEEE 802.1p for Class of Service
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for flow control
IEX-402-VDSL2 Series: ITU G.993.2
IEX-402-SHDSL Series: ITU-T G.991.2
-
Management
SNMPv1/v2c/v3, Modbus TCP, Back Pressure Flow Control, DHCP Client, HTTP, LLDP, Syslog, Telnet, TFTP
-
MIB
MIB-II
-
Time Management
SNTP
-
MAC Table Size
1 K
-
Packet Buffer Size
512 kbits
-
LED Indicators
PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port)
-
Console Port
RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)
-
Ethernet Interface
All models: CO/CPE, SNR/SPEED
IEX-402-VDSL2 Series: STD/INP
IEX-402-SHDSL Series: ANNEX B/ANNEX A, STD/TURBO
-
Power Connector
2 removable 2-contact terminal block(s)
-
Input Voltage
12/24/48 VDC, 9.6 to 60 VDC
-
Input Current
IEX-402-SHDSL Series: 0.388 A @ 12 VDC, 0.196 A @ 24 VDC, 0.097 A @ 48 VDC
IEX-402-VDSL2 Series: 0.34 A @ 24 VDC -
Overload Current Protection
Supported
-
Reverse Polarity Protection
Supported
-
Housing
Metal
-
IP Rating
IP30
-
Dimensions
35 x 130 x 105 mm (1.38 x 5.12 x 4.13 in)
-
Weight
IEX-402-SHDSL Series: 290 g (0.64 lb)
IEX-402-VDSL2 Series: 275 g (0.61 lb) -
Installation
DIN-rail mounting, Rack mounting (with optional kit)
-
Altitude
2000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
-
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) -
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
5 to 95% (non-condensing)
-
Safety
UL 508
-
Hazardous Locations
IEX-402-VDSL2 Series: ATEX, Class I Division 2
-
EMC
EN 55032/24
-
EMI
CISPR 32, FCC Part 15B Class A
-
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF -
Traffic Control
IEX-402-VDSL2 Series: NEMA TS2
-
Railway
EN 50121-4
-
Shock
IEC 60068-2-27
-
Freefall
IEC 60068-2-32
-
Vibration
IEC 60068-2-6
-
Time
IEX-402-SHDSL Series: 1,311,455 hrs
IEX-402-VDSL2 Series: 1,498,312 hrs -
Standards
Telcordia (Bellcore), GB
-
Warranty Period
5 years