Tööstuslik 802.11a/b/g/n WiFi Access Point, Seamless Wi-Fi 4, Wi-Fi mesh, Fast Roaming, -40 kuni 75°C

Laos
Tootekood: TRI191095
67,10 € 55,00 € Hind ilma km Hind koos km

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Ott-Kaarel Purru ott-kaarel.purru@yeint.ee
+372 513 2009
Kaal 500 g
Mõõtühik tk
Tootekood TRI191095
Osa number DAP140
Kaubamärk TELTONIKA

Estonia

Tellimuse järgi

Delivery time: 7-10 business days

0,00 € 0,00 € Hind ilma km Hind koos km

Tehniline info ja lisad

Tehniline info

Wireless

  • Wireless mode
    IEEE 802.11b/g/n (Wi-Fi 4), Access Point (AP), Client (STA), Mesh (802.11s), Multi AP
  • WiFi security
    WPA-PSK, WPA2-PSK, WPA3-SAE, WPA-EAP, OWE, WPA2-EAP, WPA3-EAP
  • SSID/ESSID
    SSID stealth mode and access control based on MAC address
  • Wi-Fi users
    Up to 50 simultaneous connections
  • Wireless mesh/roaming
    Fast roaming (802.11r), Radio Resource Measurement (802.11k), BSS Transition Management (802.11v), Client isolation, Hide SSID, WMM
  • Wireless MAC filter
    Allowlist, blocklist
  • Wireless QR code generator
    Once scanned, a user will automatically enter your network without needing to input login information
  • TravelMate
    Forward Wi-Fi hotspot landing page to a subsequent connected device

Ethernet

  • LAN
    2 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Network

  • Routing
    Static routing, Dynamic routing(RIP, OSPF, EIGRP, BGP, NHRP), Policy based routing, Routing rules
  • Network protocols
    TCP, UDP, IPv4, IPv6, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake On Lan (WOL)
  • VoIP passthrough support
    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring
    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall
    Port forward, traffic rules, custom rules
  • Firewall status page
    View all your Firewall statistics, rules, and rule counters
  • Ports management
    View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
  • Network topology
    Visual representation of your network, showing which devices are connected to which other devices
  • DHCP
    Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
  • QoS / Smart Queue Management (SQM)
    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS
    Supported >25 service providers, others can be configured manually
  • DNS over HTTPS
    DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
  • Network backup
    Wi-Fi WAN, VRRP, Wired options, each of which can be used as an automatic Failover
  • Load balancing
    Balance Internet traffic over multiple WAN connections
  • Hotspot
    Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
  • SSHFS
    Possibility to mount remote file system via SSH protocol
  • VRF support
    Initial virtual routing and forwarding (VRF) support
  • Traffic Management
    Real-time monitoring, wireless signal charts, traffic usage history

Security

  • Authentication
    Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
  • Firewall
    Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
  • Attack prevention
    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN
    Port and tag-based VLAN separation
  • WEB filter
    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control
    Flexible access control of SSH, Web interface, CLI and Telnet
  • SSL certificate generation
    Let's Encrypt and SCEP certificate generation methods
  • 802.1x
    Port-based network access control server

VPN

  • OpenVPN
    Multiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN Encryption
    DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsec
    XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE
    GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP
    Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel
    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN
    Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
  • SSTP
    SSTP client instance support
  • ZeroTier
    ZeroTier VPN client support
  • WireGuard
    WireGuard VPN client and server support
  • Tinc
    Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
  • Tailscale
    Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol

OPC UA

  • Supported modes
    Client, Server
  • Supported connection types
    TCP

MODBUS

  • Supported modes
    Server, Client
  • Supported connection types
    TCP
  • Custom registers
    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
  • Supported data formats
    8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATA TO SERVER

  • Protocol
    HTTP(S), MQTT, Azure MQTT
  • Data to server
    Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature

MQTT Gateway

  • Modbus MQTT Gateway
    Allows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3

  • Supported modes
    Station, Outstation
  • Supported connection
    TCP

DLMS

  • DLMS Support
    DLMS - standard protocol for utility meter data exchange
  • Supported modes
    Client
  • Supported connection types
    TCP
  • COSEM
    Allows to scan meter COSEM objects for automatic detection and configuration

API

  • Teltonika Networks Web API (beta) support
    Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

Monitoring & Management

  • WEB UI
    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
  • FOTA
    Firmware update from server, automatic notification
  • SSH
    SSH (v1, v2)
  • Email
    Receive email message status alerts of various services
  • TR-069
    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT
    MQTT Broker, MQTT publisher
  • SNMP
    SNMP (v1, v2, v3), SNMP Trap, Brute force protection
  • JSON-RPC
    Management API over HTTP/HTTPS
  • MODBUS
    MODBUS TCP status/control
  • RMS
    Teltonika Remote Management System (RMS)

IoT Platforms

  • ThingWorx
    Utility to interact with Thingworx cloud platform
  • Cumulocity - Cloud of Things
    Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP. Has reboot and firmware upgrade actions
  • Azure IoT Hub
    Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
  • AWS IoT Core
    Utility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionality

System Characteristics

  • CPU
    Mediatek, 580 MHz, MIPS 24KEc
  • RAM
    128 MB, DDR2
  • FLASH storage
    16 MB serial NOR flash

Firmware / Configuration

  • WEB UI
    Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA
    Update FW
  • RMS
    Update FW/configuration for multiple devices at once
  • Keep settings
    Update FW without losing current configuration
  • Factory settings reset
    A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration

FIRMWARE CUSTOMISATION

  • Operating system
    RutOS (OpenWrt based Linux OS)
  • Supported languages
    Busybox shell (ash), Lua 5.1, C, C++
  • Development tools
    SDK package with build environment provided
  • GPL customization
    You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
  • Package Manager
    The Package Manager is a service used to install additional software on the device

Power

  • Connector
    3-pos plugable terminal block
  • Input voltage range
    9-30 VDC, reverse polarity protection, surge protection >31 VDC 10us max
  • PoE (passive)
    Passive PoE over spare pairs. Possibility to power up through LAN2 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
  • Power consumption
    Idle: < 1 W / Max: < 2 W

Physical Interfaces

  • Ethernet
    2 x RJ45 ports, 10/100 Mbps
  • Status LEDs
    2 x LAN type LED, 1 x Power LED
  • Power
    1 x 3-pin power connector
  • Antennas
    1 x RP-SMA for Wi-Fi
  • Reset
    Reboot/User default reset/Factory reset button
  • Other
    1 x Grounding screw

Physical Specification

  • Casing material
    Aluminium housing
  • Dimensions (W x H x D)
    113,10 x 25 x 68,6 mm
  • Weight
    142.3 g
  • Mounting options
    Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)

Operating Environment

  • Operating temperature
    -40 °C to 75 °C
  • Operating humidity
    10% to 90% non-condensing
  • Ingress Protection Rating
    IP30
Tehniline info

Wireless

  • Wireless mode
    IEEE 802.11b/g/n (Wi-Fi 4), Access Point (AP), Client (STA), Mesh (802.11s), Multi AP
  • WiFi security
    WPA-PSK, WPA2-PSK, WPA3-SAE, WPA-EAP, OWE, WPA2-EAP, WPA3-EAP
  • SSID/ESSID
    SSID stealth mode and access control based on MAC address
  • Wi-Fi users
    Up to 50 simultaneous connections
  • Wireless mesh/roaming
    Fast roaming (802.11r), Radio Resource Measurement (802.11k), BSS Transition Management (802.11v), Client isolation, Hide SSID, WMM
  • Wireless MAC filter
    Allowlist, blocklist
  • Wireless QR code generator
    Once scanned, a user will automatically enter your network without needing to input login information
  • TravelMate
    Forward Wi-Fi hotspot landing page to a subsequent connected device

Ethernet

  • LAN
    2 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Network

  • Routing
    Static routing, Dynamic routing(RIP, OSPF, EIGRP, BGP, NHRP), Policy based routing, Routing rules
  • Network protocols
    TCP, UDP, IPv4, IPv6, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake On Lan (WOL)
  • VoIP passthrough support
    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring
    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall
    Port forward, traffic rules, custom rules
  • Firewall status page
    View all your Firewall statistics, rules, and rule counters
  • Ports management
    View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
  • Network topology
    Visual representation of your network, showing which devices are connected to which other devices
  • DHCP
    Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
  • QoS / Smart Queue Management (SQM)
    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS
    Supported >25 service providers, others can be configured manually
  • DNS over HTTPS
    DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
  • Network backup
    Wi-Fi WAN, VRRP, Wired options, each of which can be used as an automatic Failover
  • Load balancing
    Balance Internet traffic over multiple WAN connections
  • Hotspot
    Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
  • SSHFS
    Possibility to mount remote file system via SSH protocol
  • VRF support
    Initial virtual routing and forwarding (VRF) support
  • Traffic Management
    Real-time monitoring, wireless signal charts, traffic usage history

Security

  • Authentication
    Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
  • Firewall
    Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
  • Attack prevention
    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN
    Port and tag-based VLAN separation
  • WEB filter
    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control
    Flexible access control of SSH, Web interface, CLI and Telnet
  • SSL certificate generation
    Let's Encrypt and SCEP certificate generation methods
  • 802.1x
    Port-based network access control server

VPN

  • OpenVPN
    Multiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN Encryption
    DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsec
    XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE
    GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP
    Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel
    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN
    Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
  • SSTP
    SSTP client instance support
  • ZeroTier
    ZeroTier VPN client support
  • WireGuard
    WireGuard VPN client and server support
  • Tinc
    Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
  • Tailscale
    Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol

OPC UA

  • Supported modes
    Client, Server
  • Supported connection types
    TCP

MODBUS

  • Supported modes
    Server, Client
  • Supported connection types
    TCP
  • Custom registers
    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
  • Supported data formats
    8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATA TO SERVER

  • Protocol
    HTTP(S), MQTT, Azure MQTT
  • Data to server
    Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature

MQTT Gateway

  • Modbus MQTT Gateway
    Allows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3

  • Supported modes
    Station, Outstation
  • Supported connection
    TCP

DLMS

  • DLMS Support
    DLMS - standard protocol for utility meter data exchange
  • Supported modes
    Client
  • Supported connection types
    TCP
  • COSEM
    Allows to scan meter COSEM objects for automatic detection and configuration

API

  • Teltonika Networks Web API (beta) support
    Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

Monitoring & Management

  • WEB UI
    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
  • FOTA
    Firmware update from server, automatic notification
  • SSH
    SSH (v1, v2)
  • Email
    Receive email message status alerts of various services
  • TR-069
    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT
    MQTT Broker, MQTT publisher
  • SNMP
    SNMP (v1, v2, v3), SNMP Trap, Brute force protection
  • JSON-RPC
    Management API over HTTP/HTTPS
  • MODBUS
    MODBUS TCP status/control
  • RMS
    Teltonika Remote Management System (RMS)

IoT Platforms

  • ThingWorx
    Utility to interact with Thingworx cloud platform
  • Cumulocity - Cloud of Things
    Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP. Has reboot and firmware upgrade actions
  • Azure IoT Hub
    Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
  • AWS IoT Core
    Utility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionality

System Characteristics

  • CPU
    Mediatek, 580 MHz, MIPS 24KEc
  • RAM
    128 MB, DDR2
  • FLASH storage
    16 MB serial NOR flash

Firmware / Configuration

  • WEB UI
    Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA
    Update FW
  • RMS
    Update FW/configuration for multiple devices at once
  • Keep settings
    Update FW without losing current configuration
  • Factory settings reset
    A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration

FIRMWARE CUSTOMISATION

  • Operating system
    RutOS (OpenWrt based Linux OS)
  • Supported languages
    Busybox shell (ash), Lua 5.1, C, C++
  • Development tools
    SDK package with build environment provided
  • GPL customization
    You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
  • Package Manager
    The Package Manager is a service used to install additional software on the device

Power

  • Connector
    3-pos plugable terminal block
  • Input voltage range
    9-30 VDC, reverse polarity protection, surge protection >31 VDC 10us max
  • PoE (passive)
    Passive PoE over spare pairs. Possibility to power up through LAN2 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
  • Power consumption
    Idle: < 1 W / Max: < 2 W

Physical Interfaces

  • Ethernet
    2 x RJ45 ports, 10/100 Mbps
  • Status LEDs
    2 x LAN type LED, 1 x Power LED
  • Power
    1 x 3-pin power connector
  • Antennas
    1 x RP-SMA for Wi-Fi
  • Reset
    Reboot/User default reset/Factory reset button
  • Other
    1 x Grounding screw

Physical Specification

  • Casing material
    Aluminium housing
  • Dimensions (W x H x D)
    113,10 x 25 x 68,6 mm
  • Weight
    142.3 g
  • Mounting options
    Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)

Operating Environment

  • Operating temperature
    -40 °C to 75 °C
  • Operating humidity
    10% to 90% non-condensing
  • Ingress Protection Rating
    IP30

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Ott-Kaarel Purru ott-kaarel.purru@yeint.ee
+372 513 2009

Võid vajada ka neid