Audio / Video pikendaja (2 x Displayport + audio + 6 x USB 2.0, saatja + vastuvõtja) kuni 100m
Part nr: XD522-DP-PAIR-EURO
Tootekood: ADDXD522
Tootja: ADDER Technology
Ühik: tk
Müügipakend: 1
Garantii: 24 kuud
Kaal: 3.14 kg
Saadavus: Tellimisel
Tarneaeg 14
Mahub pakiautomaati: Jah
Hind ilma km: 1295.45€
Lisa ostukorvi

dderLink XD522 is a high performance KVM (Keyboard, Video, Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station whilst maintaining the same user desktop experience. The XD522 can transmit 4K @30Hz, or 2560x1600 at HDR10 or two 1920x1200 video streams to two monitors. Also supports DisplayPort audio, digital audio (S/PDIF), analog audio, Hi-Speed USB 2.0 and USB 2.0 (full and low speed) over CATx cable.

  • 4K @30Hz DisplayPort extender
  • Single High Dynamic Range (HDR 10) monitor, 2560x1600 @60Hz 10bit per color
  • 100 meter extension distance for two 1920x1200 screens
  • 150 meter extension distance for a single 1920x1080 screen
  • USB 2.0 Hi-Speed for mass storage devices plus: Keyboard, mouse tablet and touch
  • Supports DisplayPort Audio, S/PDIF and analog audio
  • Plug and play
ADDERLink XD522 4K DisplayPort Extender

Product Codes


Perfect Digital Video, Real Time Control

The system is uncompressed, where by every pixel of every frame are sent without loss. The receiver supports DisplayPort Dual Mode (DP++) which means that monitors which only support HDMI or DVI can be used (with the correct adapter cable).

Dsiplayport and thunderbolt display resolutions

Single CATx Cable 

Video, USB 2.0 (HID-only) and audio all pass along a single cable. A second CATx cable is required for the Hi-Speed USB 2.0 extension.

Up to 150 Meter Extension Distances 

Distance is dependent on the monitor resolution, number of monitors, cable type and the number of connection breaks for patch panels and wall plates. See table on datasheet for details.

USB 2.0

Enables connection of any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers. Mass storage devices and isochronous devices such as webcams and headsets can be used through the transparent USB 2.0 Hi-Speed port.

EDID Management

The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.

Plug and Play

The AdderLink XD522 extender is delivered in a zero config state so you can plug the units in and start working with them straight away. There is no need for drivers or software to be installed. 

Digital Audio

Supports DisplayPort audio and S/PDIF interface via an optical 3.5mm jack socket (dual use with analog audio via mini Toslink).

HD Quality Analog Audio

HD audio quality (stereo channel 24 bit sampled at 96kHz) is available to transfer audio from local to remote for Line in / Line out. Microphone in and headphone use cases are also supported.

4K Resolution Support

Now supports 4K resolutions up to 3840x2160 (VESA timing).

Hardware compatibility

All computers with DisplayPort, USB, audio, RS232 - requirement dependent.

DisplayPort interface

The system supports DisplayPort 1.1 video resolutions to a maximum of 3840x2160@30Hz, 2560 x1600@60Hz  or two 1920 x1200@60Hz screens. The receiver unit supports DisplayPort Dual Mode (DP++) also. DPCP and HDCP are not supported.

USB 2.0

Supports up to six USB 2.0 devices (low or full speed). The system does not allow non-HID devices on ports marked “A”. Isochronous devices are supported (i.e. USB audio or video devices) on the Hi-Speed link only marked “B”.

DisplayPort Audio

The system delivers analog stereo audio (Line in, Line out) & supports microphone input & headphones. It also delivers S/PDIF (optical input) via a 3.5mm jack line in connector (mini Toslink). The DisplayPort audio path can have up to eight channels of 24-bit 192 kHz uncompressed “Pulsecode  modulation”PCM audio or can encapsulate compressed audio formats in the audio stream. Supported compressed formats: DRA, Dolby MAT, DTS HD.


RS232 can be passed between the units to a maximum baud rate of 115K2 via the options port.

Software compatibility

All known operating systems.

Computer connections Transmitter (TX)

DisplayPort x 2, Audio 3.5mm in, Audio 3.5mm out, USB type B x 2 , RS232 10p10c options port.

Peripheral connections Receiver (RX)

DisplayPort ++ x 2,  Audio 3.5mm in,  Audio 3.5mm out, Headphone 3.5mm out, Microphone 3.5mm in,  USB type A x 4, RS232 10p10c options port.

Physical design

1U compact case, robust metal construction. 198mm/7.92” (w), 44mm/1.76” (h), 120mm/4.8” (d), 0.75kg/1.65lbs.


2.5mm DC jack (power adapter included), 100-240VAC 50/60Hz, 0.8A, input to power adapter, 5VDC 20W output from power adapter.

Operating temperature

0 to 40ºC / 32 to 104ºF.



Storage Temperature

-20ºC to 70ºC / -4ºF to 158ºF


10% to 90% (non-condensing)


Max. 2,000m / 6,561 ft


Important Extension distance Information

Recommended cables are CAT7 shielded foiled twisted pairs:
Daetwyler 7702                 Flexible patch cable
Daetwyler 7120                 Bulk cable


Resolution Cable Type Patch connections Distance
2560x1600@60Hz or two 1920x1080@60Hz or 4k@30Hz CAT7 Bulk (trunk) 0 100 metres
2560x1600@60Hz CAT7 Patch 2 80 metres
2560x1600@60Hz CAT6a 2 70 metres
2560x1600@60Hz CAT5e 2 60 metres
Single 1920x1080@60Hz CAT5e 2 150 metres


Distances are achieved using single lengths of trunk/bulk cable with two 3 meter CAT7a patch cables. For each additional break/patch connection reduce distance by 5 meters. Preferably patch cables should be of type CAT7a and less than 2 meters. Patch cables over 2 meters must be CAT7a.

The AdderLink XD522 is not recommended for use with the NVIDIA Quadro FX 3800 graphics card. Please contact Adder technical support for more information.

Abi ja Info
Meie brändid
Uued tooted

Wentronic 2018

Lindy kataloog 2017