Konverter VGA - DVI-D 1920 x 1200 60Hz, USB toitega

Laos
Tootekood: ADD050060
128,52 € 105,34 € Hind ilma km Hind koos km

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Keio Kalm keio.kalm@yeint.ee
+372 564 79201
Kaal 310 g
Mõõtühik tk
Tootekood ADD050060
Osa number Adder DVA
Kaubamärk ADDER

Estonia

Tellimuse järgi

0,00 € 0,00 € Hind ilma km Hind koos km
Tootekirjeldus

ADDER DVA is a high performance VGA to DVI-D video converter that transforms analog signals to digital. Placed in-line and USB powered this solution fits well with the AdderLink Infinity range of products.  It converts VGA signals, up to 1920 x 1200 @ 60Hz, into a DVI standard equivalent.

 Analog to digital video conversion up to 1920 x 1200 (165MHz max. pixel frequency)
• EDID management to ensure clean operation
• Adjustment control for alignment, tone, sharpness and brightness
• Adjustment control for alignment, tone, sharpness and brightness
• USB powered with USB feed through

Adder DVA example diagram

Product Codes

Adder DVA

High quality VGA to DVI-D conversion

Adder DVA is a high quality VGA to DVI-D converter supporting most resolutions up to 1920 x 1200 @ 60Hz.

Auto calibration 

Adder DVA auto calibrates for horizontal and vertical position. Manual adjustment is also available through the Virtual Control Panel (VCP) app, if required.

EDID management

EDID management is a critical element in VGA/DVI-D conversion, to ensure the correct settings are passed to the computer’s graphics card.

USB powered with pass through 

Adder DVA requires no separate power adapter and instead draws less than 300mA in operation from a spare USB port on the computer. A USB pass-through port is made available on the Adder DVA to allow a low-powered USB device to be connected; thus, the same total number of USB ports remain available for other uses.

Flash upgradeable

Adder DVA is flash upgradeable, allowing custom EDID adjustment for non-standard operations. Upgrades are achieved via the USB port.

Virtual control panel app over DDC-CI

Adder DVA is supplied with a Virtual Control Panel (VCP) app which allows brightness, tone and sharpness to be adjusted. Vertical and horizontal video alignment can also be adjusted, where necessary. The VCP app contains a test pattern to accurately display the changes. EDID management options can also be changed and the EDID’s of the monitors can be displayed.

Tehniline info

Hardware compatibility

All computers with VGA output

VGA input

The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz with pixel frequencies up to 165MHz

DVI Output

Conforms to the DVI 1.0 standard. Resolutions supported to a maximum of 1920 x 1200 @ 60Hz with pixel frequencies up to 165MHz

Software compatibility for VCP app

Windows 7 and above with .NET v3.5

Computer connections 

VGA DB15 x 1, USB type B x 1

Peripheral connections

DVI-D x 1, USB type A x 1

Physical design 

Compact case, robust metal construction. 55mm/2.16” (w), 25mm/1.0” (h), 70mm/2.75” (d), 0.1kg/0.2lbs. 

Power

USB powered – less than 300mA (1.5W)

Operating temperature 

0 to 40ºC / 32 to 104ºF

Approvals 

CE, FCC

Tootekirjeldus
Tehniline info

ADDER DVA is a high performance VGA to DVI-D video converter that transforms analog signals to digital. Placed in-line and USB powered this solution fits well with the AdderLink Infinity range of products.  It converts VGA signals, up to 1920 x 1200 @ 60Hz, into a DVI standard equivalent.

 Analog to digital video conversion up to 1920 x 1200 (165MHz max. pixel frequency)
• EDID management to ensure clean operation
• Adjustment control for alignment, tone, sharpness and brightness
• Adjustment control for alignment, tone, sharpness and brightness
• USB powered with USB feed through

Adder DVA example diagram

Product Codes

Adder DVA

High quality VGA to DVI-D conversion

Adder DVA is a high quality VGA to DVI-D converter supporting most resolutions up to 1920 x 1200 @ 60Hz.

Auto calibration 

Adder DVA auto calibrates for horizontal and vertical position. Manual adjustment is also available through the Virtual Control Panel (VCP) app, if required.

EDID management

EDID management is a critical element in VGA/DVI-D conversion, to ensure the correct settings are passed to the computer’s graphics card.

USB powered with pass through 

Adder DVA requires no separate power adapter and instead draws less than 300mA in operation from a spare USB port on the computer. A USB pass-through port is made available on the Adder DVA to allow a low-powered USB device to be connected; thus, the same total number of USB ports remain available for other uses.

Flash upgradeable

Adder DVA is flash upgradeable, allowing custom EDID adjustment for non-standard operations. Upgrades are achieved via the USB port.

Virtual control panel app over DDC-CI

Adder DVA is supplied with a Virtual Control Panel (VCP) app which allows brightness, tone and sharpness to be adjusted. Vertical and horizontal video alignment can also be adjusted, where necessary. The VCP app contains a test pattern to accurately display the changes. EDID management options can also be changed and the EDID’s of the monitors can be displayed.

Hardware compatibility

All computers with VGA output

VGA input

The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz with pixel frequencies up to 165MHz

DVI Output

Conforms to the DVI 1.0 standard. Resolutions supported to a maximum of 1920 x 1200 @ 60Hz with pixel frequencies up to 165MHz

Software compatibility for VCP app

Windows 7 and above with .NET v3.5

Computer connections 

VGA DB15 x 1, USB type B x 1

Peripheral connections

DVI-D x 1, USB type A x 1

Physical design 

Compact case, robust metal construction. 55mm/2.16” (w), 25mm/1.0” (h), 70mm/2.75” (d), 0.1kg/0.2lbs. 

Power

USB powered – less than 300mA (1.5W)

Operating temperature 

0 to 40ºC / 32 to 104ºF

Approvals 

CE, FCC

Võtmesõnad

dvi vga converter dvi vga konverter vga dvi vga dvi converter vga dvi konverter

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Keio Kalm keio.kalm@yeint.ee
+372 564 79201