Fiiberoptiline indikaator Fiberlert, 850nm...1625nm
Laos
Tootekood: FLUKE_FIBERLERT-125
169,58 €
139,00 €
Hind ilma km
Hind koos km
Võta ühendust
Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Kender Adler kender.adler@yeint.ee
+372 581 34530
Kaal | 510 g |
---|---|
Mõõtühik | tk |
Tootekood | FLUKE_FIBERLERT-125 |
Osa number | 234-8363 |
Kaubamärk | FLUKE NETWORKS |
Estonia
Laos
In stock: 1 tk
Tootekirjeldus
Key features
- Detects optical power in SM and MM fiber (850 to 1625 nm)
- No setup or interpretation – light and sound indicate signal
- “Non-contact” detector reduces risk of contamination and damage
- Suitable for ports and patch cords, SM, MM, UPC and APC
- LightBeat™ indicates operation and battery status
Tehniline info
Specifications | |
Operating Principle | FiberLert is a live fiber detector that senses near infrared light emitted from fiber optic cabling. A continuous red glow at the handle and an audible beeping noise (if not switched off) indicates the presence of near infrared light. |
Optical Interface | Non-contact ceramic ferrule. Fits directly with 1.25 mm LC receptacles. Tethered ferrule adapter for testing 1.25 mm ferrule patch cord. Supports single-mode, multimode, UPC and APC connectors and ports. |
Wavelength Detection | 850 nm to 1625 nm |
Optical Power Detection Range | +3 dBm to -30 dBm |
Light Detection | Visible steady red LED indicator when optical power is detected |
Lightbeat™ Indicator | Flashes twice every two seconds when unit is on and battery strength is sufficient. |
Battery Saver | Unit automatically turns off after five minutes of inactivity |
Batteries | 2 AAA alkaline batteries included |
Battery Life | Typically, greater than 1 year (5 hrs. of use a week) |
Item Size | 0.6” x 1.0” x 6.6” / 1.6 x 2.5 x 16.8 cm |
Item Weight | 2.1 oz / 59 g |
Operating Temperature Range | -10 °C to 50 °C |
Operating Humidity Ranges |
95 % (10 °C to 35 °C) Non-condensing 75 % (35 °C to 40 °C) Non-condensing uncontrolled < 10 °C |
Operating Altitude | ≤ 3000 meters |
Storage Temeperature | -20 °C to 50 °C |
Tootekirjeldus
Tehniline info
Key features
- Detects optical power in SM and MM fiber (850 to 1625 nm)
- No setup or interpretation – light and sound indicate signal
- “Non-contact” detector reduces risk of contamination and damage
- Suitable for ports and patch cords, SM, MM, UPC and APC
- LightBeat™ indicates operation and battery status
Specifications | |
Operating Principle | FiberLert is a live fiber detector that senses near infrared light emitted from fiber optic cabling. A continuous red glow at the handle and an audible beeping noise (if not switched off) indicates the presence of near infrared light. |
Optical Interface | Non-contact ceramic ferrule. Fits directly with 1.25 mm LC receptacles. Tethered ferrule adapter for testing 1.25 mm ferrule patch cord. Supports single-mode, multimode, UPC and APC connectors and ports. |
Wavelength Detection | 850 nm to 1625 nm |
Optical Power Detection Range | +3 dBm to -30 dBm |
Light Detection | Visible steady red LED indicator when optical power is detected |
Lightbeat™ Indicator | Flashes twice every two seconds when unit is on and battery strength is sufficient. |
Battery Saver | Unit automatically turns off after five minutes of inactivity |
Batteries | 2 AAA alkaline batteries included |
Battery Life | Typically, greater than 1 year (5 hrs. of use a week) |
Item Size | 0.6” x 1.0” x 6.6” / 1.6 x 2.5 x 16.8 cm |
Item Weight | 2.1 oz / 59 g |
Operating Temperature Range | -10 °C to 50 °C |
Operating Humidity Ranges |
95 % (10 °C to 35 °C) Non-condensing 75 % (35 °C to 40 °C) Non-condensing uncontrolled < 10 °C |
Operating Altitude | ≤ 3000 meters |
Storage Temeperature | -20 °C to 50 °C |
Võta ühendust
Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Kender Adler kender.adler@yeint.ee
+372 581 34530