Toitesiini PSM 1 väljund 16A 1900mm 3m

Laos
Tootekood: RIT7856005
378,05 € 309,88 € Hind ilma km Hind koos km

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Kender Adler kender.adler@yeint.ee
+372 581 34530
Kaal 4.9 kg
Mõõtühik tk
Tootekood RIT7856005
Osa number 7856005
Kaubamärk RITTAL

Estonia

Tellimuse järgi

0,00 € 0,00 € Hind ilma km Hind koos km
Tehniline info
Design: With 3 m connection cable (connector type CEE/EN 60 309)
Description: The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. This can even be done whilst the system is operational, because the support section is shock hazard-protected.
Benefits: Modules may be retrofitted whilst operational.
Technical specifications: Each plug-in module picks off a phase on the support rail, either from infeed or from the redundant infeed, depending on the direction of connection.
Depending on the design, single-/3-phase construction with a maximum current of 2 x (3 x 16 A/32 A).
3-phase redundant infeed supported.
The redundant circuit is completely separate from the 3 phases of the support rail.
Modules may be equipped with integral overcurrent protection, so that only the affected module is deactivated in the event of an excessively high current. The other modules remain operational.
Material: Aluminium section, natural anodised
Module slots (max.): 7
To fit: Enclosure type: TS 8
Enclosure type: TS IT
Height:   2000 mm
Infeeds: Qty.: 1
Phases per infeed: 3~
Length of connection cable: 3 m
Ambient conditions: Operating temperature: +5°C...+45°C
Storage temperature: -20°C...+60°C
Ambient humidity (non-condensing): 5 % - 95 %
Type of electrical connection: CEE
Rated current (max.): 16 A
Tehniline info
Design: With 3 m connection cable (connector type CEE/EN 60 309)
Description: The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. This can even be done whilst the system is operational, because the support section is shock hazard-protected.
Benefits: Modules may be retrofitted whilst operational.
Technical specifications: Each plug-in module picks off a phase on the support rail, either from infeed or from the redundant infeed, depending on the direction of connection.
Depending on the design, single-/3-phase construction with a maximum current of 2 x (3 x 16 A/32 A).
3-phase redundant infeed supported.
The redundant circuit is completely separate from the 3 phases of the support rail.
Modules may be equipped with integral overcurrent protection, so that only the affected module is deactivated in the event of an excessively high current. The other modules remain operational.
Material: Aluminium section, natural anodised
Module slots (max.): 7
To fit: Enclosure type: TS 8
Enclosure type: TS IT
Height:   2000 mm
Infeeds: Qty.: 1
Phases per infeed: 3~
Length of connection cable: 3 m
Ambient conditions: Operating temperature: +5°C...+45°C
Storage temperature: -20°C...+60°C
Ambient humidity (non-condensing): 5 % - 95 %
Type of electrical connection: CEE
Rated current (max.): 16 A

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Kender Adler kender.adler@yeint.ee
+372 581 34530