Toimub laadimine... 
Toitesiin 230V 4-le moodulile 1200mm kõrgus 3x16A
Laos
Tootekood: RIT7856010
263,98 €
216,38 €
Hind ilma km
Hind koos km
Võta ühendust
Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Kender Adler kender.adler@yeint.ee
+372 581 34530
| Kaal | 2.55 kg |
|---|---|
| Mõõtühik | tk |
| Tootekood | RIT7856010 |
| Osa number | 7856010 |
| Kaubamärk | RITTAL |
Estonia
Tellimuse järgi
Tehniline info ja lisad
Tehniline info
| Design: | With 2 infeeds (jack), 3-phase redundancy |
|---|---|
| Description: | The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. This can even be done whilst the system is operational, because the support section is shock hazard-protected. |
| Benefits: | Modules may be retrofitted whilst operational. |
| Technical specifications: |
Each plug-in module picks off a phase on the support rail, either from infeed or from the redundant infeed, depending on the direction of connection. Depending on the design, single-/3-phase construction with a maximum current of 2 x (3 x 16 A/32 A). 3-phase redundant infeed supported. The redundant circuit is completely separate from the 3 phases of the support rail. Modules may be equipped with integral overcurrent protection, so that only the affected module is deactivated in the event of an excessively high current. The other modules remain operational. |
| Material: | Aluminium section, natural anodised |
| Module slots (max.): | 4 |
| To fit: |
Enclosure type: TS 8 Enclosure type: TS IT Height: 1200 mm |
| Infeeds: |
Qty.: 2 Phases per infeed: 3~ |
| Ambient conditions: |
Operating temperature: +5°C...+45°C Storage temperature: -20°C...+60°C Ambient humidity (non-condensing): 5 % - 95 % |
| Type of electrical connection: | WAGO X-COM |
| Rated current (max.): | 16 A |
Tehniline info
| Design: | With 2 infeeds (jack), 3-phase redundancy |
|---|---|
| Description: | The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. This can even be done whilst the system is operational, because the support section is shock hazard-protected. |
| Benefits: | Modules may be retrofitted whilst operational. |
| Technical specifications: |
Each plug-in module picks off a phase on the support rail, either from infeed or from the redundant infeed, depending on the direction of connection. Depending on the design, single-/3-phase construction with a maximum current of 2 x (3 x 16 A/32 A). 3-phase redundant infeed supported. The redundant circuit is completely separate from the 3 phases of the support rail. Modules may be equipped with integral overcurrent protection, so that only the affected module is deactivated in the event of an excessively high current. The other modules remain operational. |
| Material: | Aluminium section, natural anodised |
| Module slots (max.): | 4 |
| To fit: |
Enclosure type: TS 8 Enclosure type: TS IT Height: 1200 mm |
| Infeeds: |
Qty.: 2 Phases per infeed: 3~ |
| Ambient conditions: |
Operating temperature: +5°C...+45°C Storage temperature: -20°C...+60°C Ambient humidity (non-condensing): 5 % - 95 % |
| Type of electrical connection: | WAGO X-COM |
| Rated current (max.): | 16 A |
Võta ühendust
Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Kender Adler kender.adler@yeint.ee
+372 581 34530