Laiendusmoodul 32 dry contact inputs

Expansion modules increase the number of available ports for sensors connected to one controller. The EE321 and EE322 modules must be connected to the CAN interface of the EC335 4DC controller.

The CAN interface is a serial bus and allows connecting in a daisy chain (from device to device). A maximum of 8 devices can be connected to the controller via the CAN interface.

The length of the CAN bus should not exceed 200m. It is a UTP Cat5e suggested as a CAN bus cable. The EE323 module is to be mounted inside the controller. 

This module provides a 1-wire bus for up to 20 1-wire sensors. The length of the 1-wire bus should not exceed 100m. It is a UTP Cat5e suggested as a 1-wire bus cable.

• The module must be connected to the controller CAN port.
• There are 2 CAN ports (RJ12) for daisy chain connecting.
• The controller can support up to 32 additional dry contact inputs.
• There are 19’’ brackets included.
• Dimensions: 215x40x40
• Maximum cable length of CAN bus: 200m