Switch: 24 x 10/100/1000Mbps, metallist, Standard, Flow Control Off, VLAN, Extend, räkitav

Cost-effective Gigabit Solution for Enterprise Backbone and Data Center Networking 

PLANET GSW-2401 Gigabit Ethernet Switch provides 24 RJ45 10/100/1000Mbps ports for high-speed network connectivity. It can automatically identify and determine the correct transmission speed and half/full duplex mode of the attached devices with its 24 Gigabit ports that support 9K jumbo frame feature. Therefore, the GSW-2401 can handle extremely large amounts of data transmission in a secure topology linking to a backbone or high-power servers.

DIP Switch for Operation Mode Selection

The new GSW-2401 offers “Standard”, “Flow Control Off”, “VLAN” or “Extend” mode. The GSW-2401 operates as a normal Gigabit Ethernet Switch in the "Standard" operation mode.

The "VLAN" operation mode features port-based VLAN function that can help to prevent the connected clients’ multicast or broadcast storm from influencing each other.

In the "Extend" operation mode, the GSW-2401 operates on a per-port basis at 10Mbps duplex operation but can transmit data over a distance of up to 200 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the GSW-2401 provides an additional solution for distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates each port so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.

High Performance

The GSW-2401 provides a high-performance switch architecture that is capable of providing the non-blocking switch fabric and wire-speed throughput as high as 48Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.  Besides, the Flow Control function of the GSW-2401 enables routers and servers to directly connect to the Switch for fast and reliable data transfer.

All the RJ45 copper interfaces of the GSW-2401 support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard for auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.

Excellent Traffic Transmission

The GSW-2401 supports Store-and-Forward forwarding scheme to ensure low latency and high data integrity, which eliminates unnecessary traffic and relieves congestion on critical network paths. With an intelligent address recognition algorithm, the GSW-2401 recognizes up to 8K different MAC addresses. The high data throughput and 48Gbps internal switching fabric make it ideal for most Gigabit environments, especially when network is upgraded to a Gigabit environment. 

Fanless Design

With its good ventilation design, the GSW-2401 is able to operate all along without a fan, thus reducing substantial power consumption and creating a noiseless environment. The GSW-2401 is definitely the best choice for any working environment without affecting its performance.

Backbone Switch

With up to 48 Gigabits per second of non-blocking switch fabric, the GSW-2401 can easily provide high bandwidth for both today’s and future requirements.

Server Farm Switch

Providing 24 Gigabit Ethernet ports, the GSW-2401 is ideal to be used as a server farm switch connecting to your servers and powerful desktops.

Physical Port

• 24 10/100/1000BASE-T Gigabit Ethernet ports
• Supports auto MDI/MDI-X function

Layer 2 Features

• Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standards
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Integrated address look-up engine, supporting 8K absolute MAC addresses
• 9K jumbo packet support
• Power saving ability for Green networking 
• IEEE 802.1Q VLAN packet transparency support
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• Hardware-based 10/100BASE-TX, half/full duplex and 1000BASE-T full duplex mode, flow control and auto-negotiation
• Automatic address learning and address aging
• Supports CSMA/CD protocol

Hardware Features

• 100~240V AC, 0.17A, 50~60Hz universal power input 
• DIP switch for standard/flow control off/VLAN/Extend mode selection
• FCC, CE class A compliant 

• Hardware Specifications
  Hardware Version	9
  10/100/1000BASE-T MDI/MDIX Ports	24
  DIP Switch	Operation mode selection ?- Standard ?- Flow control off? ?- VLAN ?- Extend
  Weight	1.9kg
  Power Consumption/Dissipation	14.6 watts/49 BTU
  Power Requirements	100~240V AC, 0.17A, 50-60Hz
  Dimensions (W x D x H)	440 x 208 x 44mm, 1U height
  Switching
  Switch Processing Scheme	Store-and-Forward
  Throughput (packet per second)	35.7Mpps
  Switch Fabric	48Gbps
  Address Table	8K entries
  Jumbo Packet Size	9K
  Flow Control	Back pressure for half duplex IEEE 802.3x Pause frame for full duplex
  Standards Conformance
  Regulatory Compliance	FCC Part 15 Class A, CE
  Standards Compliance	IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) IEEE 802.3ab (Gigabit Ethernet) IEEE 802.3x (Full-Duplex Flow Control) IEEE 802.3az Energy Efficient Ethernet (EEE)
  Environment
  Operating	Operating Temperature: 0~50 degrees C Relative Humidity: 5% to 95% (non-condensing)
  Storage	Temperature: -10~70 degrees C Relative Humidity: 5% to 95% (non-condensing)