Tööstuslik konverter: 10/100BaseT(X) to 100BaseFX, multi mode, SC, -40 kuni 75°C

Laos
Tootekood: PLIFT802T
102,00 € 83,61 € Hind ilma km Hind koos km

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Ott-Kaarel Purru ott-kaarel.purru@yeint.ee
+372 513 2009
Kaal 0 g
Mõõtühik tk
Tootekood PLIFT802T
Osa number IFT-802T

Estonia

Laos

In stock: 1 tk

0,00 € 0,00 € Hind ilma km Hind koos km
Tootekirjeldus

Distance Extension with High Performance and Steady Network Communication
PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment.

Robust Media Converter Performance
PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.

Transport Networking
PLANET’s Industrial Media Converter, IFT-80xT series, offers high reliability and security to guarantee the continuous industrial operation in harsh environments such as control cabinet of transportation, factory floors or and environments with extremely low or high temperature. In the industrial networking environments, each networked device is required to keep running continuously in the hazardous status. If industrial equipment fails to connect to the network, it might influence the entire operation of industrial systems and thus cause incredibly financial loss. With the IFT-80xT Industrial Media Converter, which complies with all the requirements of industrial applications, customers may enjoy high reliability, fast recovery capability, and safe Ethernet network operation.

Fiber-optic Networking for ISPs, Enterprises, and Homes
With stable performance of data transmission and easy installation, the IFT-80xT Industrial Media Converter series can build an ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs, or FTTB (Fiber to the Building) for enterprises with small office network environment.


Easy Installation and Wide Range of Power Usages
The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.

Tehniline info

Interface
• 1-port 10/100Base-T RJ-45 with auto negotiation and auto-MDI/MDI-X function
• 1 100Base-FX SC interface, providing long distance up to 2km on IFT-802T
• 1 100Base-FX SC interface, providing long distance for 15km on IFT-802TS15
• 1 Mini-GBIC slot, providing multi choice of SFP modules on IFT-805AT

Industrial Conformance
• 12V to 48V DC, redundant power with polarity reverse protect function
• -40 to 75 degrees C operating temperature
• IP30 metal case
• Relay alarm for port breakdown
• Supports 6KV DC Ethernet ESD protection
• Supports 6KV DC EFT protection for power line
• Free Fall, Shock and Vibration Stability
• DIN-rail and wall-mountable hardware design

Layer 2 Features
• Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard
• Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port
• Store-and-Forward Switching Architecture
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• Supports packet size of up to 1522bytes
• CSMA/CD Protocol
• Automatic source address learning and aging

 

 

Hardware Specifications
10/100Base-TX Port 1 RJ-45 auto-MDI / MDI-X port
100Base-FX Port IFT-802T: 1 SC interface
IFT-802TS15: 1 SC interface
IFT-805AT: 1 SFP slot
Fiber Port Type IFT-802T: SC / multi-mode
IFT-802TS15: SC / single-mode
IFT-805AT: Vary on module
Cable Distance IFT-802T: 2km
IFT-802TS15: 15km
IFT-805AT: Vary on module
Optical Frequency IFT-802T: 1310nm
IFT-802TS15: 1310nm
IFT-805AT: Vary on module
Launch Power (dBm) Max
IFT-802T: -14
IFT-802TS15: 0

Min
IFT-802T: -20
IFT-802TS15: -20

Vary on module
IFT-805AT
Receive Sensitivity (dBm) IFT-802T: -32
IFT-802TS15: -32
IFT-805AT: Vary on module
Maximum Input Power (dBm) IFT-802T: -14
IFT-802TS15: 0
IFT-805AT: Vary on module
Dimensions (W x D x H) 135 x 85 x 32 mm
Weight 430g
Installation DIN rail kit and wall mount ear
Maximum Frame Size 1522bytes packet size
Flow Control Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
Enclosure IP-30 slim type metal case
LED Indicator System:
?•Power 1 (Green)
?•Power 2 (Green)
?•Fault (Green)
1 x copper port:
?•10/100 (Green)
?•LNK/ACT (Green)
1 x 100FX port:
?•100 (Green)
?•LNK/ACT (Green)
Power Input 12 to 48V DC redundant power with polarity reverse protection function
Power Consumption 3 watts/ 10BTU (maximum)
Protection ESD (Ethernet): 6KV DC
Surge (Power): 6KV DC
Speed Twisted-pair:
?•10/20Mbps for half / full-duplex
?•100/200Mbps for half / full duplex
Fiber-optic:
?•200Mbps for full-duplex
Network cables 10/100Base-TX:
?•2-pair UTP Cat. 3, 4, 5 (100 meters, max.)
?•EIA/TIA-568 100-ohm STP (100 meters, max.)
100Base-FX:
?•IFT-802T: Multi-mode optical fiber 62.5/125μm / 50/125μm (2km)
?•IFT-802TS15: Single-mode optical fiber 9/125μm (15km)
?•IFT-805AT: SFP slot (depending on SFP module)
Standards Conformance
Emissions FCC Class A, CE Class A
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX / 100Base-FX
IEEE 802.3x flow control and back pressure
Stability Testing IEC60068-2-32 (Free Fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Environment
Operating Temperature -40~75 degrees C
Operating Humidity 5~95% non-condensing
Storage Temperature -40~85 degrees C
Storage Humidity 5~95% non-condensing
Tootekirjeldus
Tehniline info

Distance Extension with High Performance and Steady Network Communication
PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment.

Robust Media Converter Performance
PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.

Transport Networking
PLANET’s Industrial Media Converter, IFT-80xT series, offers high reliability and security to guarantee the continuous industrial operation in harsh environments such as control cabinet of transportation, factory floors or and environments with extremely low or high temperature. In the industrial networking environments, each networked device is required to keep running continuously in the hazardous status. If industrial equipment fails to connect to the network, it might influence the entire operation of industrial systems and thus cause incredibly financial loss. With the IFT-80xT Industrial Media Converter, which complies with all the requirements of industrial applications, customers may enjoy high reliability, fast recovery capability, and safe Ethernet network operation.

Fiber-optic Networking for ISPs, Enterprises, and Homes
With stable performance of data transmission and easy installation, the IFT-80xT Industrial Media Converter series can build an ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs, or FTTB (Fiber to the Building) for enterprises with small office network environment.


Easy Installation and Wide Range of Power Usages
The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.

Interface
• 1-port 10/100Base-T RJ-45 with auto negotiation and auto-MDI/MDI-X function
• 1 100Base-FX SC interface, providing long distance up to 2km on IFT-802T
• 1 100Base-FX SC interface, providing long distance for 15km on IFT-802TS15
• 1 Mini-GBIC slot, providing multi choice of SFP modules on IFT-805AT

Industrial Conformance
• 12V to 48V DC, redundant power with polarity reverse protect function
• -40 to 75 degrees C operating temperature
• IP30 metal case
• Relay alarm for port breakdown
• Supports 6KV DC Ethernet ESD protection
• Supports 6KV DC EFT protection for power line
• Free Fall, Shock and Vibration Stability
• DIN-rail and wall-mountable hardware design

Layer 2 Features
• Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard
• Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port
• Store-and-Forward Switching Architecture
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• Supports packet size of up to 1522bytes
• CSMA/CD Protocol
• Automatic source address learning and aging

 

 

Hardware Specifications
10/100Base-TX Port 1 RJ-45 auto-MDI / MDI-X port
100Base-FX Port IFT-802T: 1 SC interface
IFT-802TS15: 1 SC interface
IFT-805AT: 1 SFP slot
Fiber Port Type IFT-802T: SC / multi-mode
IFT-802TS15: SC / single-mode
IFT-805AT: Vary on module
Cable Distance IFT-802T: 2km
IFT-802TS15: 15km
IFT-805AT: Vary on module
Optical Frequency IFT-802T: 1310nm
IFT-802TS15: 1310nm
IFT-805AT: Vary on module
Launch Power (dBm) Max
IFT-802T: -14
IFT-802TS15: 0

Min
IFT-802T: -20
IFT-802TS15: -20

Vary on module
IFT-805AT
Receive Sensitivity (dBm) IFT-802T: -32
IFT-802TS15: -32
IFT-805AT: Vary on module
Maximum Input Power (dBm) IFT-802T: -14
IFT-802TS15: 0
IFT-805AT: Vary on module
Dimensions (W x D x H) 135 x 85 x 32 mm
Weight 430g
Installation DIN rail kit and wall mount ear
Maximum Frame Size 1522bytes packet size
Flow Control Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
Enclosure IP-30 slim type metal case
LED Indicator System:
?•Power 1 (Green)
?•Power 2 (Green)
?•Fault (Green)
1 x copper port:
?•10/100 (Green)
?•LNK/ACT (Green)
1 x 100FX port:
?•100 (Green)
?•LNK/ACT (Green)
Power Input 12 to 48V DC redundant power with polarity reverse protection function
Power Consumption 3 watts/ 10BTU (maximum)
Protection ESD (Ethernet): 6KV DC
Surge (Power): 6KV DC
Speed Twisted-pair:
?•10/20Mbps for half / full-duplex
?•100/200Mbps for half / full duplex
Fiber-optic:
?•200Mbps for full-duplex
Network cables 10/100Base-TX:
?•2-pair UTP Cat. 3, 4, 5 (100 meters, max.)
?•EIA/TIA-568 100-ohm STP (100 meters, max.)
100Base-FX:
?•IFT-802T: Multi-mode optical fiber 62.5/125μm / 50/125μm (2km)
?•IFT-802TS15: Single-mode optical fiber 9/125μm (15km)
?•IFT-805AT: SFP slot (depending on SFP module)
Standards Conformance
Emissions FCC Class A, CE Class A
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX / 100Base-FX
IEEE 802.3x flow control and back pressure
Stability Testing IEC60068-2-32 (Free Fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Environment
Operating Temperature -40~75 degrees C
Operating Humidity 5~95% non-condensing
Storage Temperature -40~85 degrees C
Storage Humidity 5~95% non-condensing

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Ott-Kaarel Purru ott-kaarel.purru@yeint.ee
+372 513 2009