KVM switch/matrix: 1x HDMI, 1x RJ45, 3x USB 2.0, Audio 3.5mm, PoE toide, välise toitega
Võta ühendust
Tellimused ja päringud
info@yeint.eeTehniline informatsioon ja projektid
Keio Kalm keio.kalm@yeint.eeKaal | 1 kg |
---|---|
Mõõtühik | tk |
Tootekood | ADD010041 |
Osa number | XDIP-EURO |
Kaubamärk | ADDER |
Estonia
Tellimuse järgi
The AdderLink XDIP is a compact, easy to install, fanless matrix solution that runs on a standard IP network and enables users to extend and manage their computers with ultra-low latency, HD video and stereo audio. The XDIP is scalable, from simple extension to small matrix. It is very well suited to small and medium sized installations.
• Uses IP technology over standard CATx network cable
• Point-to-point, switching, sharing or small matrix operation
• Local USB and video feed through ports
• PoE models are powered by PoE or an optional external PSU
• USB2.0 (low & full speed) for keyboard, mouse, tablet and touch screen
• Analog audio with headphone support
Product Codes
Configurable units
The XDIP user and computer units are the same and assigned a role at set up. They can transmit/receive up to 1920x1200 video, stereo analog audio and USB2.0 over a single CATx network cable.
High quality video, real time control
XDIP implements low latency, high quality, 60Hz video compression to deliver an “at the computer” user experience over a standard Gigabit LAN.
CATx cable for connection
Video, USB2.0 and audio all pass along a single minimum spec of CAT5e cable allowing use of existing infrastructure cables in the building and an immediate ROI. Distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances are achieved by routing through your IP infrastructure.
Feed through and local computer support
Video and USB feed through ports are available. These enable a local console at the source computer. A local computer is also supported at the user station.
One solution, many uses
XDIP nodes can be configured as a simple extender, distributed KVM switch or KVM sharer or any combination up to 8 computers and 8 users (each user does not necessarily need to be connected to the same 8 computers).
EDID management
The extender has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer or alternatively, a fixed EDID can be specified.
Plug and Play
There is no need for drivers or software to be installed. A simple wizard takes you through setup at the start of life of the product.
CD-quality analog audio
CD-quality stereo audio (16-bit sampling at 48kHz) is passed between the local and remote units. Headphones are also supported (16 to 32 Ohms).
Hardware compatibility
All computers with HDMI, USB and analogue audio. Can be interfaced to VGA, DVI and DisplayPort with appropriate adaptors
Video Resolution
The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz
USB 2.0
Supports USB2.0 HID devices (keyboard, mouse, tablet and touch)
Software compatibility
All known operating systems. No drivers required
Computer connections
HDMI, Audio 3.5mm, USB type B, 8p8c Ethernet port
Console connections
HDMI, Ethernet, 3 x USB type A, Audio 3.5mm
Power connections
POE 802.3af via Ethernet port or 3 Pin Locking DC jack (Optional: 100-240VAC 50/60Hz, 0.7A, input to power adapter, 12VDC 18W output from power adapter)
Physical design
Compact case, robust metal construction. 169mm/6.65” (w), 31mm/1.22” (h), 120mm/4.8” (d), 0.6kg/1.3lbs.
Operating temperature
0 to 40ºC / 32 to 104ºF
Approvals
CE, FCC
ORDERING INFORMATION
XDIP-POE Single node, POE powered or by optional 12V PSU
XDIP-IEC Single node with external 12V PSU
XDIP-xx Single node with external 12V PSU and country-specific power cable
XDIP-RED Single node with power cable for connection to RED PSU (redundant power supply)
XDIP-PSU-US* Single node with external 12V PSU and country-specific cable, no POE function
XDIP-PSU-RED* Single node with power cable for connection to RED-PSU, no POE function
* US market specific
xx = Mains lead country code:
UK = United Kingdom
EURO = Europe
JP = Japan
CN = China
ADDITIONAL ACCESSORIES
RMK8: 19” rack mount kit - 2 units/1U slot
RMK10: Wall/desk mount kit
The AdderLink XDIP is a compact, easy to install, fanless matrix solution that runs on a standard IP network and enables users to extend and manage their computers with ultra-low latency, HD video and stereo audio. The XDIP is scalable, from simple extension to small matrix. It is very well suited to small and medium sized installations.
• Uses IP technology over standard CATx network cable
• Point-to-point, switching, sharing or small matrix operation
• Local USB and video feed through ports
• PoE models are powered by PoE or an optional external PSU
• USB2.0 (low & full speed) for keyboard, mouse, tablet and touch screen
• Analog audio with headphone support
Product Codes
Configurable units
The XDIP user and computer units are the same and assigned a role at set up. They can transmit/receive up to 1920x1200 video, stereo analog audio and USB2.0 over a single CATx network cable.
High quality video, real time control
XDIP implements low latency, high quality, 60Hz video compression to deliver an “at the computer” user experience over a standard Gigabit LAN.
CATx cable for connection
Video, USB2.0 and audio all pass along a single minimum spec of CAT5e cable allowing use of existing infrastructure cables in the building and an immediate ROI. Distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances are achieved by routing through your IP infrastructure.
Feed through and local computer support
Video and USB feed through ports are available. These enable a local console at the source computer. A local computer is also supported at the user station.
One solution, many uses
XDIP nodes can be configured as a simple extender, distributed KVM switch or KVM sharer or any combination up to 8 computers and 8 users (each user does not necessarily need to be connected to the same 8 computers).
EDID management
The extender has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer or alternatively, a fixed EDID can be specified.
Plug and Play
There is no need for drivers or software to be installed. A simple wizard takes you through setup at the start of life of the product.
CD-quality analog audio
CD-quality stereo audio (16-bit sampling at 48kHz) is passed between the local and remote units. Headphones are also supported (16 to 32 Ohms).
Hardware compatibility
All computers with HDMI, USB and analogue audio. Can be interfaced to VGA, DVI and DisplayPort with appropriate adaptors
Video Resolution
The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz
USB 2.0
Supports USB2.0 HID devices (keyboard, mouse, tablet and touch)
Software compatibility
All known operating systems. No drivers required
Computer connections
HDMI, Audio 3.5mm, USB type B, 8p8c Ethernet port
Console connections
HDMI, Ethernet, 3 x USB type A, Audio 3.5mm
Power connections
POE 802.3af via Ethernet port or 3 Pin Locking DC jack (Optional: 100-240VAC 50/60Hz, 0.7A, input to power adapter, 12VDC 18W output from power adapter)
Physical design
Compact case, robust metal construction. 169mm/6.65” (w), 31mm/1.22” (h), 120mm/4.8” (d), 0.6kg/1.3lbs.
Operating temperature
0 to 40ºC / 32 to 104ºF
Approvals
CE, FCC
ORDERING INFORMATION
XDIP-POE Single node, POE powered or by optional 12V PSU
XDIP-IEC Single node with external 12V PSU
XDIP-xx Single node with external 12V PSU and country-specific power cable
XDIP-RED Single node with power cable for connection to RED PSU (redundant power supply)
XDIP-PSU-US* Single node with external 12V PSU and country-specific cable, no POE function
XDIP-PSU-RED* Single node with power cable for connection to RED-PSU, no POE function
* US market specific
xx = Mains lead country code:
UK = United Kingdom
EURO = Europe
JP = Japan
CN = China
ADDITIONAL ACCESSORIES
RMK8: 19” rack mount kit - 2 units/1U slot
RMK10: Wall/desk mount kit