KVM pikendaja läbi CATx kuni 50m, 2xDVI, 4xUSB 2.0, 3.5mm heli (komplekt)

Laos
Tootekood: ADD050050
1 239,32 € 1 015,83 € Hind ilma km Hind koos km

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Keio Kalm keio.kalm@yeint.ee
+372 564 79201
Kaal 2.35 kg
Mõõtühik tk
Tootekood ADD050050
Osa number X-DVIPRO-MS2-EURO
Kaubamärk ADDER

Estonia

Tellimuse järgi

0,00 € 0,00 € Hind ilma km Hind koos km
Tootekirjeldus

AdderLink X-DVI PRO MultiScreen is a high performance KVM (Keyboard, Video and Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment, away from the user work station environment, whilst maintaining the same user experience. It can transmit two Single Link DVI video streams, USB 2.0 and analog audio over two CATx cables.

  • Plug and play, 
  • 50 meter extension distance,
  • Dual screens at 1920 x 1200 @ 60Hz maximum resolution,
  • USB 2.0 Low and Full speed, 
  • Keyboard, mouse, tablet and touch.
ADDERLink X-DVI PRO MS

Product Codes

X-DVIPRO-MS2

Perfect digital video, real time control

The AdderLink X-DVI PRO MultiScreen extender uses an uncompressed system whereby every pixel of every frame are sent without loss. HDMI video and audio can be extended with the correct adapter cable, although HDCP and CEC are not supported.

50 meters over a single CATx cable 

Video, USB 2.0 (Low and Full speed) and audio all pass along a single cable, providing up to 50 meters of extension. The second video head requires a separate CATx cable.

Distance is dependent upon video resolution, the CATx cable type, and the number of connection breaks for patch panels and wall plates. See table on reverse for details.

USB 2.0 

Enables connection of any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks, 3D explorers and mass storage devices. Full speed (12Mbps) isochronous devices such as headsets are supported.

Power efficiency

The X-DVI PRO MS extender is designed to be highly power efficient and run with the minimum of input. In fact, the transmitter unit is so energy efficient that it can be powered solely from two host computer USB connections. 

EDID management

The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.

Plug and Play

The X-DVI PRO MS extenders are delivered in a zero config state so you can plug them in and start working with them straight away. There’s no need for drivers or software to be installed. 

Analog audio

Stereo CD quality (stereo channel 16 bit sampled at 44.1kHz) is available to transfer audio from local to remote for line out.

Digital audio

Supports 8 channels of HDMI audio simultaneously with analog audio.

Built to last

Adder Technology have a well-earned reputation for creating products that perform well and stay the course. The X-DVI PRO MS extender units are no exception and feature tough metallic enclosures to ensure they can easily withstand everyday treatment. The internal components and external connectors too are selected for their reliability in addition to their performance characteristics. 

Tehniline info

Hardware compatibility

All computers with DVI-D, USB and audio - requirement dependent.

DVI-D Interface – digital only

The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz per head.

USB 2.0 Low and Full speed

Transparent USB 2.0 (Low and Full speed) that supports HID and mass storage devices to a maximum of 50 meters. You may need to reduce maximum cable length by 5 meters if a USB hub is connected to the receiver unit.

Audio

The system delivers analog stereo audio (Line Out).

8 channels of HDMI audio are supported with sample sizes of 16, 20 or 24 bits at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz (simultaneously with the jack audio).

Software compatibility

All known operating systems.

Computer connections Transmitter (TX)

2 x DVI-D, audio 3.5mm in, USB type B.

Computer connections Receiver (RX)

2 x DVI-D, audio 3.5mm out, USB type A x 4.

Physical design 

Compact case, robust metal construction 120mm / 4.7’’ (w) x 75mm / 3’’(d) x 48mm / 2’’ (h) 500g / 1.1 lb.

Power

Rx: 2.5mm DC jack (power adapter included),100-240VAC 50/60Hz, 0.4A, input to power adapter, 5VDC 12.5W output from power adapter.

Tx: Powered from two USB connections.

Optional 2.5mm DC jack (power adapter not included.

Operating temperature 

0 to 40ºC / 32 to 104ºF.

Approvals 

CE, FCC

Important extension distance details

Recommended cables are CAT7 shielded foiled twisted pairs:

Daetwyler 7702 Flexible patch cable 

Daetwyler 7120 Bulk cable

 

Category 5 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.

Order codes:

X-DVIPRO-MS2-XX
XX = Mains Lead Country Code:
UK = United Kingdom
US = United States
EURO = Europe
AUS = Australia

ADDITIONAL ACCESSORIES

X-RMK-FASCIA-Dual: Rack mount plate with screws included

X-RMK-CHASSIS: Rack mount chassis

VSCD11: HDMI to DVI cable

 

Standard Resolution Frequency Cable
Distance
TVHD 1920 x 1080 60 Hz CAT7a 60 meters
UXGA 1600 x 1200 60 Hz CAT7a 60 meters
WUXGA 1920 x 1200 60 Hz CAT7a 60 meters
TVHD 1920 x 1080 60 Hz CAT6a 55 meters
TVHD 1920 x 1080 60 Hz CAT5e 45 meters
SXGA 1280 x 1024 60 Hz CAT7a 70 meters
SXGA 1280 x 1080 60 Hz CAT6a 65 meters
SXGA 1280 x 1080 60 Hz CAT5e 55 meters

Notes: Distances are achieved using single lengths of trunk/ bulk cable. For each break/patch connection, reduce distance by 5m. Preferably patch cables should be of type CAT7a and less than 2m. Patch cables over 2m must be CAT7a. CAT5e is not recommended for use with this system. The maximum extension distance for USB is 50m including connections to and from the X-DVI PRO MS independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system. CAT5e is not recommended for use with this system. The maximum extension distance for USB is 50m including connections to and from the X-DVI PRO MS independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system.

Tootekirjeldus
Tehniline info

AdderLink X-DVI PRO MultiScreen is a high performance KVM (Keyboard, Video and Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment, away from the user work station environment, whilst maintaining the same user experience. It can transmit two Single Link DVI video streams, USB 2.0 and analog audio over two CATx cables.

  • Plug and play, 
  • 50 meter extension distance,
  • Dual screens at 1920 x 1200 @ 60Hz maximum resolution,
  • USB 2.0 Low and Full speed, 
  • Keyboard, mouse, tablet and touch.
ADDERLink X-DVI PRO MS

Product Codes

X-DVIPRO-MS2

Perfect digital video, real time control

The AdderLink X-DVI PRO MultiScreen extender uses an uncompressed system whereby every pixel of every frame are sent without loss. HDMI video and audio can be extended with the correct adapter cable, although HDCP and CEC are not supported.

50 meters over a single CATx cable 

Video, USB 2.0 (Low and Full speed) and audio all pass along a single cable, providing up to 50 meters of extension. The second video head requires a separate CATx cable.

Distance is dependent upon video resolution, the CATx cable type, and the number of connection breaks for patch panels and wall plates. See table on reverse for details.

USB 2.0 

Enables connection of any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks, 3D explorers and mass storage devices. Full speed (12Mbps) isochronous devices such as headsets are supported.

Power efficiency

The X-DVI PRO MS extender is designed to be highly power efficient and run with the minimum of input. In fact, the transmitter unit is so energy efficient that it can be powered solely from two host computer USB connections. 

EDID management

The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.

Plug and Play

The X-DVI PRO MS extenders are delivered in a zero config state so you can plug them in and start working with them straight away. There’s no need for drivers or software to be installed. 

Analog audio

Stereo CD quality (stereo channel 16 bit sampled at 44.1kHz) is available to transfer audio from local to remote for line out.

Digital audio

Supports 8 channels of HDMI audio simultaneously with analog audio.

Built to last

Adder Technology have a well-earned reputation for creating products that perform well and stay the course. The X-DVI PRO MS extender units are no exception and feature tough metallic enclosures to ensure they can easily withstand everyday treatment. The internal components and external connectors too are selected for their reliability in addition to their performance characteristics. 

Hardware compatibility

All computers with DVI-D, USB and audio - requirement dependent.

DVI-D Interface – digital only

The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz per head.

USB 2.0 Low and Full speed

Transparent USB 2.0 (Low and Full speed) that supports HID and mass storage devices to a maximum of 50 meters. You may need to reduce maximum cable length by 5 meters if a USB hub is connected to the receiver unit.

Audio

The system delivers analog stereo audio (Line Out).

8 channels of HDMI audio are supported with sample sizes of 16, 20 or 24 bits at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz (simultaneously with the jack audio).

Software compatibility

All known operating systems.

Computer connections Transmitter (TX)

2 x DVI-D, audio 3.5mm in, USB type B.

Computer connections Receiver (RX)

2 x DVI-D, audio 3.5mm out, USB type A x 4.

Physical design 

Compact case, robust metal construction 120mm / 4.7’’ (w) x 75mm / 3’’(d) x 48mm / 2’’ (h) 500g / 1.1 lb.

Power

Rx: 2.5mm DC jack (power adapter included),100-240VAC 50/60Hz, 0.4A, input to power adapter, 5VDC 12.5W output from power adapter.

Tx: Powered from two USB connections.

Optional 2.5mm DC jack (power adapter not included.

Operating temperature 

0 to 40ºC / 32 to 104ºF.

Approvals 

CE, FCC

Important extension distance details

Recommended cables are CAT7 shielded foiled twisted pairs:

Daetwyler 7702 Flexible patch cable 

Daetwyler 7120 Bulk cable

 

Category 5 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.

Order codes:

X-DVIPRO-MS2-XX
XX = Mains Lead Country Code:
UK = United Kingdom
US = United States
EURO = Europe
AUS = Australia

ADDITIONAL ACCESSORIES

X-RMK-FASCIA-Dual: Rack mount plate with screws included

X-RMK-CHASSIS: Rack mount chassis

VSCD11: HDMI to DVI cable

 

Standard Resolution Frequency Cable
Distance
TVHD 1920 x 1080 60 Hz CAT7a 60 meters
UXGA 1600 x 1200 60 Hz CAT7a 60 meters
WUXGA 1920 x 1200 60 Hz CAT7a 60 meters
TVHD 1920 x 1080 60 Hz CAT6a 55 meters
TVHD 1920 x 1080 60 Hz CAT5e 45 meters
SXGA 1280 x 1024 60 Hz CAT7a 70 meters
SXGA 1280 x 1080 60 Hz CAT6a 65 meters
SXGA 1280 x 1080 60 Hz CAT5e 55 meters

Notes: Distances are achieved using single lengths of trunk/ bulk cable. For each break/patch connection, reduce distance by 5m. Preferably patch cables should be of type CAT7a and less than 2m. Patch cables over 2m must be CAT7a. CAT5e is not recommended for use with this system. The maximum extension distance for USB is 50m including connections to and from the X-DVI PRO MS independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system. CAT5e is not recommended for use with this system. The maximum extension distance for USB is 50m including connections to and from the X-DVI PRO MS independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system.

Võta ühendust

Tellimused ja päringud
info@yeint.ee
+372 659 3600
Tehniline informatsioon ja projektid
Keio Kalm keio.kalm@yeint.ee
+372 564 79201