Spetsmutter M6-8 1,7-2,6mm TYP956 B ´´Racki Mutter´´
Võta ühendust
Tellimused ja päringud
info@yeint.eeTehniline informatsioon ja projektid
Raido Luts raido.luts@yeint.eeKaal | 6 g |
---|---|
Mõõtühik | tk |
Tootekood | 600150 |
Osa number | 038161 |
Kaubamärk | WURTH |
Estonia
Laos
In stock: 1964 tk
- Used as internal connectors for sheet metal structures.
- Efficient installation by simply pressing in.
- Self-adhesive due to spring-steel nut holder.
- Variations in manufacturing tolerances are compensated for during installation by the longitudinal and lateral mobility of the nut in the nut holder.
- Can also be used in difficult installation conditions or tight spaces.
- Can be reused
Material |
Steel |
Surface |
Galvanised |
Thread type x nominal diameter (D) |
M6 |
Max. width (b1) |
13.5 mm |
Max. length (a1) |
14.2 mm |
Height (h1) |
9.5 mm |
Min./max. material thickness |
1.7-2.7 mm |
Punched-hole width x punched-hole length (n) |
9.5 x 9.5 mm |
Dimensions of square cage nut (L x B x H) |
11 x 11 x 4.5 mm |
Min./max. length (a) |
13.6-14.2 mm |
Min./max. internal length (b) |
7.7-8.4 mm |
Nominal diameter |
6 mm |
Max. material thickness |
2.7 mm |
Min. length |
13.6 mm |
Max. internal length |
8.4 mm |
Min. internal length |
7.7 mm |
Internal width (f) |
9.3 mm |
Punched-hole length |
9.5 mm |
Version |
Without assurance |
Min. width |
13 mm |
- Used as internal connectors for sheet metal structures.
- Efficient installation by simply pressing in.
- Self-adhesive due to spring-steel nut holder.
- Variations in manufacturing tolerances are compensated for during installation by the longitudinal and lateral mobility of the nut in the nut holder.
- Can also be used in difficult installation conditions or tight spaces.
- Can be reused
Material |
Steel |
Surface |
Galvanised |
Thread type x nominal diameter (D) |
M6 |
Max. width (b1) |
13.5 mm |
Max. length (a1) |
14.2 mm |
Height (h1) |
9.5 mm |
Min./max. material thickness |
1.7-2.7 mm |
Punched-hole width x punched-hole length (n) |
9.5 x 9.5 mm |
Dimensions of square cage nut (L x B x H) |
11 x 11 x 4.5 mm |
Min./max. length (a) |
13.6-14.2 mm |
Min./max. internal length (b) |
7.7-8.4 mm |
Nominal diameter |
6 mm |
Max. material thickness |
2.7 mm |
Min. length |
13.6 mm |
Max. internal length |
8.4 mm |
Min. internal length |
7.7 mm |
Internal width (f) |
9.3 mm |
Punched-hole length |
9.5 mm |
Version |
Without assurance |
Min. width |
13 mm |