Juhtmevaba laadimise saatja moodul
Tootekood: ADA2162
Tootja: Adafruit Industries
Ühik: tk
Müügipakend: 1
Kaal: 0.05 kg
Saadavus: Tellimisel
Tarneaeg 10-15
tööpäeva
Mahub pakiautomaati: Jah
Hind ilma km: 29.53€
Lisa ostukorvi
Kogus:

If you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.' Qi is a trademark name for a thin and smart inductive charging system. Many large gadget companies have standardized on Qi, which means it's easy to find a charging dish and we thought it might be cool if your Arduino project can recharge itself wirelessly.

We've added a ton of Qi receivers but, until now, we haven't had a charging base.  No longer! This is a super simple Qi transmitter.  It will work with any standard Qi charger receivers - like the ones we carry here.  You just connect the board to a 5v power supply - either through a micro USB port - then put your device w/ Qi receive onto the base. If you want to 'share' the microUSB power connection, you can also connect direct to the USB-A port

Maximum output is around 5W which is good for most smart phones, basically 1000mA charge at 5V on the other side of the wireless connection.  It has a charging distance of 2-8mm, works with all our Qi charge receivers. You can only use one receiver per transmitter so if you want to charge two Qi devices at once, you'll need 2 transmitters.

Note: PCB may come in blue or green!

  • Input: 5V
  • Input Current: 2A
  • Maximum output power of 5W
  • Operating Frequency: 100-200kHz
  • Charging Distance: 2-8mm
  • Charging Plate Dimensions: 53mm x 53mm x 4mm
  • PCB Dimensions w/ Components: 55mm x 37mm x 6mm
  • Weight: 47g
Kontaktid
Abi ja Info
Meie brändid
Uudiskiri
Kampaaniatooted
Uued tooted
Leiunurk
Pakikapid

Weller

YE õpinurk