Seadmekapp 24U 1195x600x800 k,l,s, klaasuks, kandevõime kuni 600kg, hall, SRS
Võta ühendust
Tellimused ja päringud
info@yeint.eeTehniline informatsioon ja projektid
Kender Adler kender.adler@yeint.eeKaal | 82 kg |
---|---|
Mõõtühik | tk |
Tootekood | BKT11015681 |
Osa number | SRS2460802611.1 |
Kaubamärk | BKT Elektronik |
Estonia
Tellimuse järgi
Mõõdud: 24U, kõrgus: 1195mm, laius: 600mm, sügavus: 800mm
Materjal: Lehtteras
Uks: Klaasuks ees
Kandevõime: kuni 600kg
Värv: hall, RAL 7035
Komplektis: läbiviigu harjased, M6 kruvid ja mutrid (16tk), kapijalad, 19" paigaldussiinid ees ja taga
Included in delivery:
- brush strip
- set of M6 assembly bolts (16 pcs)
- set of floor-leveller feet
- 1,5 m edge sealing
- 2 pairs of 19’’ mounting sections
- Sheet steel housing with welded frame, completely pre-assembled, self ventilated,
- Surface finish: powder painted in RAL 7035 - light grey (other colors on request),
- Protection IP20 in accordance with PN 92/E-08106/EN 60529/IEC 529. (does not apply to brush cable entries),
- Indoor use, .
- Cabinets can be arranged in line using line-up bolts after removing side walls (Part No.11190130)
- Cabinet frame fully welded - 1,5 mm thick sheet steel on 4 x leveling feet M10.
- Front door: window made of safety glass (optionally: full steel, full glass, punched perforated plate), opening angle 180 degrees. Left or right door opening options,
- Cabinet rear panel - 1 mm. thick sheet steel, removable with two single point locks (Optionally: full steel or perforated, left or right side mounted door),
- Cabinet side panels - 1 mm thick sheet steel, removable with two single point locks,
- Two pairs of the profile rails (AL-Zn coated) each arranged at the front and rear on the inside. Each profile with unit labeling,
Maximum spacing between front and rear profile rails:
- cabinet depth 600 mm - max 472 mm
- cabinet depth 800 mm - max 672 mm
- cabinet depth 900 mm - max 772 mm
- cabinet depth 1000 mm - max 872 mm
- Possibility to increase maximum weight of equipment mounted in the cabinet SRS by using cabinet max load strengthen kit,
- Cables let in entry optionally either from roof or base, either, through top or bottom of the rear side of cabinet, pre-punched opening (Dimensions: 450 x 90 mm),
- In the roof and base of cabinet 2 x 4U blind plates (pre - punched opening) for fan units (possible configurations 1 or 2 x 2 fan units, 1 x 4 fan units, 1 x 6 fan units),
Optionally:
- plinth standard or with tilt protection
- cabinet wheel kit - 11190143 (maximum load capacity 150 kg.)
- heavy duty castor set - (maximum load capacity 500 kg.) for cabinets 600 width - 11190160, and for 800 width - 11190180
- optional 19" swing frame 90° opening
- plinths, shelves, fan units, light units, power distribution units, blanking covers, cable management accessories etc.
Mõõdud: 24U, kõrgus: 1195mm, laius: 600mm, sügavus: 800mm
Materjal: Lehtteras
Uks: Klaasuks ees
Kandevõime: kuni 600kg
Värv: hall, RAL 7035
Komplektis: läbiviigu harjased, M6 kruvid ja mutrid (16tk), kapijalad, 19" paigaldussiinid ees ja taga
Included in delivery:
- brush strip
- set of M6 assembly bolts (16 pcs)
- set of floor-leveller feet
- 1,5 m edge sealing
- 2 pairs of 19’’ mounting sections
- Sheet steel housing with welded frame, completely pre-assembled, self ventilated,
- Surface finish: powder painted in RAL 7035 - light grey (other colors on request),
- Protection IP20 in accordance with PN 92/E-08106/EN 60529/IEC 529. (does not apply to brush cable entries),
- Indoor use, .
- Cabinets can be arranged in line using line-up bolts after removing side walls (Part No.11190130)
- Cabinet frame fully welded - 1,5 mm thick sheet steel on 4 x leveling feet M10.
- Front door: window made of safety glass (optionally: full steel, full glass, punched perforated plate), opening angle 180 degrees. Left or right door opening options,
- Cabinet rear panel - 1 mm. thick sheet steel, removable with two single point locks (Optionally: full steel or perforated, left or right side mounted door),
- Cabinet side panels - 1 mm thick sheet steel, removable with two single point locks,
- Two pairs of the profile rails (AL-Zn coated) each arranged at the front and rear on the inside. Each profile with unit labeling,
Maximum spacing between front and rear profile rails:
- cabinet depth 600 mm - max 472 mm
- cabinet depth 800 mm - max 672 mm
- cabinet depth 900 mm - max 772 mm
- cabinet depth 1000 mm - max 872 mm
- Possibility to increase maximum weight of equipment mounted in the cabinet SRS by using cabinet max load strengthen kit,
- Cables let in entry optionally either from roof or base, either, through top or bottom of the rear side of cabinet, pre-punched opening (Dimensions: 450 x 90 mm),
- In the roof and base of cabinet 2 x 4U blind plates (pre - punched opening) for fan units (possible configurations 1 or 2 x 2 fan units, 1 x 4 fan units, 1 x 6 fan units),
Optionally:
- plinth standard or with tilt protection
- cabinet wheel kit - 11190143 (maximum load capacity 150 kg.)
- heavy duty castor set - (maximum load capacity 500 kg.) for cabinets 600 width - 11190160, and for 800 width - 11190180
- optional 19" swing frame 90° opening
- plinths, shelves, fan units, light units, power distribution units, blanking covers, cable management accessories etc.